Member record · ID 14988
hycide
5 posts recovered 1 thread started First seen 11 Aug 2008 Last seen 18 Aug 2008
Threads started
1 in the archiveRecent posts
All 5- Brakes Dragging, Not The Usual Suspects...help! I checked the front MC by disassembling it and inspecting the seals, spring, and piston. Everything looked like new. The main and return ports were also clear, and I double checked this by blasting them with compressed…
- Brakes Dragging, Not The Usual Suspects...help! Now I have not only replaced the seals in the front calipers, but I am also running steel braided lines on the front, one from the front MC to each caliper. Still the brakes are dragging. SOmebody PLEASE help me out…
- Brakes Dragging, Not The Usual Suspects...help! I am asking about the servo/proportional control valves because they are the last thing I can think that would be causing the problem. M/Cs are good, seals are good, pistons are clean. My question is whether these…
- Brakes Dragging, Not The Usual Suspects...help! The pins are not binding up either. What about the PCV valve? I notice that brake fluid travels more readily one direction than the other through the valve, and the valve itself bleeds verrryy slowly. Is this normal?…
- Brakes Dragging, Not The Usual Suspects...help! Just bought an 02 VTEC with 12000 miles. The front AND rear brakes are dragging on the pads. They drag hard enough to stop the bike when the fluid gets hot. I have tried bleeding the system, checked front and rear…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.