Member record · ID 17052
Zedrx
3 posts recovered 1 thread started First seen 21 Apr 2009 Last seen 22 Apr 2009
Threads started
1 in the archiveRecent posts
All 3- Removing Swingarm On A 93 Vfr750 Does the bolt you're trying to remove have a castle-shaped locking nut around it? It did, but I removed the castle nut before trying to remove it. After the castle nut is removed the one below it should come out, right?
- Removing Swingarm On A 93 Vfr750 Yes, after you remove the 'nut' on the swingarm pivot shaft, the next step is to remove the collar under it, it screws out. You're supposed to use a Honda special tool, but you can make one or improvise if you know what…
- Removing Swingarm On A 93 Vfr750 I'm trying to figure out how to remove the swingarm on my 93 VFR750. I got the rear wheel and brakes off. I removed the pivot bolt and the nut. There seems to be a sleeve still in the pivot. I'm pretty sure I need to…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.