Member record · ID 25202
bikeman1
6 posts recovered 2 threads started First seen 6 Jun 2012 Last seen 9 Jun 2012
Threads started
2 in the archiveRecent posts
All 6- VFR1200 Overheating question Thanks all for all the feedback. I took the bike out for a 350 mile ride yesterday where temperatures ranged from 41 degrees to 58 degrees (I've got good riding gear". when out in open country there were only 3 bars on…
- Any issue with aftermarket pipes on the vfr1200 Thanks all for the input. The problem with the error code 35 is solved. The cable from the exhaust servo to the flapper valve was wrapped around the servo wheel the wrong direction preventing the servo from pulling the…
- VFR1200 Overheating question I thought about the "engine being tight because it's new" idea and have considered that a contributing factor. It's just that it was so cool that I had to wear a heavy riding jacket to stay warm. I guess I was expecting…
- Any issue with aftermarket pipes on the vfr1200 Darn! I did throughout my screwing around open the flapper by hand and turned the servo back by hand to return it to the closed position. I did reset (clear) the code via the instructions in the shop manual but it keeps…
- VFR1200 Overheating question I have 180 miles on my new 2010 VFR1200 and the bike seems to heat up and turn the cooling fan on fairly frequently. Today I took it for a short ride and the fan kept coming on when riding short distances (about 1/4…
- Any issue with aftermarket pipes on the vfr1200 What has to be done with the "flapper" valve and actuating servo from the stock exhaust when putting on aftermarket pipes? I currently have a error code 35 after screwing around with the stock setup trying to hear what…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.