Member record · ID 26041
Baroquenride
4 posts recovered 1 thread started First seen 25 May 2022 Last seen 1 Sep 2022
Threads started
1 in the archiveRecent posts
All 4- Revalving a 5th gen fork for better rebound I finally had a chance to work on the forks this week and I think I finally found the right combo or damn close! I added 3 more .10 x 17 shims as that's what I had on hand. So now I have this combo on the rebound side…
- Revalving a 5th gen fork for better rebound Thanks for the help ShipFixer, yeah I agree on the logic about the ports in the stock valve being much smaller therefore not using quite the same shimstack as the comparable Gold Valves. I figure with the Maxima 5wt at…
- Revalving a 5th gen fork for better rebound Mohawk, 5/27/2022 at 10:35 AM ...or a far stiffer shim stack. That's what I'm going for is a stiffer shim stack and looking for advice from folks that have done it. Guys, I've already played with oil weights in the past…
- Revalving a 5th gen fork for better rebound I have a 2000 5th gen with Gold Valve compression valves and would like to utilize the stock rebound valves because I have too many other things I need to spend my money on, including a recent traffic award, and instead…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.