Member record · ID 26455
chizzie
36 posts recovered 1 thread started First seen 11 Jan 2013 Last seen 22 Mar 2013
Threads started
1 in the archiveRecent posts
All 36- 94 Cafe Project Sold. :(
- 94 Cafe Project Updates: Coated wheel & new tire! [image: 3ECDFE3D-6BD3-46F3-9BFE-60CA1955F838-692] [image: 20466B3C-BDE9-457A-950F-45ED5CE8AE90-692] Gauges.. [image: 91249DD3-8749-4B7B-95B9-18D566A3A284-692] Tyga Moto exhaust! [image:…
- 94 Cafe Project Started the bike up for the first time in a while today. Couldn't take it for a spin yet, but while up on the rear stand I put it in first to test the speedo. While the wheel was spinning, I noticed that the tire was…
- 94 Cafe Project Wiring has been such a huge headache, I still haven't had any luck getting fuel, oil pressure, temp, speed, tach or anything important to register. I have both diagrams, from what it looks like, I'm connecting the right…
- 94 Cafe Project Great info, saved me a lot of time trying to dig through those old threads! There are a few local guys parting out gsxr1000s, is there a specific year I'm looking for, Im assuming there are 2 different lengths since I…
- 94 Cafe Project Thanks Yosh! Do you have any more info on gravity feeding the fuel? I heard it's possible, but for some reason I can't get myself to do it. I guess I'm afraid it'll flood, not even sure if it's possible but it just…
- 94 Cafe Project This is just a test fit! Any thoughts, concerns, or alternate ideas for a nice clean undertail set up? [image: B85C5FED-D001-4859-A2A4-1945B02BE2CE-293] Also can anyone recommend a light weight small battery I can hide…
- 94 Cafe Project Swapped my left exit TBR system for a right exit TBR. The materials seem to be different, does anyone know what the differences in metals are by chance? [image: C451273C-5CF6-4B2C-9C72-83D2DEC972E7-293]
- 94 Cafe Project More updates :) [image: 1B38594D-851A-4F02-8772-3D64EDFABEFC-224] [image: 3B35B1DE-44EC-4842-9044-EF4A62689B09-224] [image: 5B8A8103-AF89-42EA-81EE-CC991B9D6B49-224] Still have some more wiring to go, any help with my…
- 94 Cafe Project Haven't had much time this week between work and school to play around with the bike. Luckily I have all day tomorrow to start with the wiring. The gauge set up I'm running is from a 1st gen SV650 , I picked it up for…
- 94 Cafe Project Ive been curious what my TBR system cost back in the day brand new. its been getting a lot of attention lately and I haven't seen anyone with the full TBR system either left or right exit. I know right exit full TBR…
- 94 Cafe Project An update from the past week: [image: CB431BF7-1A46-4DC5-839E-E30B69506CDA-712] [image: 54610F83-B8BC-4CD0-A860-BB27E315A6C1-712]
- 94 Cafe Project mk2davis I know your clutch cover is pretty clean, but have you thought about a clear one? On your naked bike, I think that would just look the tops! Yeah definitely on the list of things to do, just have to finish up a…
- 94 Cafe Project Been busy this weekend! [image: 1B5118DC-0A28-4DA9-8393-C80447D1FF88-887] [image: 53D883C3-0D5E-496D-B94C-6C6A44A2F315-464] [image: D371105B-BFBD-40B2-AA70-4A53E11D70E0-887] [image:…
- 94 Cafe Project :) [image: 2A543A9C-F63C-44C3-A85A-BF81DCC63003-758]
- 94 Cafe Project Not much done in the past couple days. Been cleaning up the wiring and getting my sub frame figured out. Before I went out and bought a set of 41mm clip ons with no rise, I tried to mount the stock clip ons under the…
- 94 Cafe Project Thanks, didnt realize that was a clip.
- 94 Cafe Project Hyofighter the oil cooler lines on mine just the rubber hose but with some heat sheild sleeve over it it has been trouble free for the last 10000ks , even a few skids with hot pipes and no air flow havent caused any…
- 94 Cafe Project I just got finished removing and looping the oil cooler. All I did was remove the 2 hard lines, cut them leaving about 3/4 of an inch on each side so that the hose clamps has something to grip, then used a high temp oil…
- 94 Cafe Project Hyofighter: http://www.vfrdiscussion.com/forum/index.php/topic/58725-my-95-v4-fighter-project/page-1
- 94 Cafe Project Edit: Found the link to that build. Great looking bike.
- 94 Cafe Project JZH, thanks so much for the info that's exactly what I needed to know, also thanks for the link to the wiring diagram, I was looking for one for a little while and only came across a couple Euro diagrams. I came across…
- 94 Cafe Project Thanks for the info, ill give another go at the tank tonight. As far as the head light, right now I'm still stuck on wiring. I understand basic wiring and know how to cut and splice, just not sure which wire goes where.…
- 94 Cafe Project marriedman Something I've always wondered - why are streetfighter tails always sticking up so high? Not sure why that is, I've noticed that too. My previous picture is a bit deceiving, the sub frame isn't welded…
- 94 Cafe Project Got the tail in. Doing some modifications to the stock subframe since it's way too wide for this tail. Definitely running into much more than I expected, if only I had the ability to weld and make brackets at my house!…
- 94 Cafe Project A little update: Found a composite company down in southern California who had an 04-05 RS125 tail in stock and shipped out the same day! It should be here this coming week! All other companies I contacted didn't have…
- 94 Cafe Project YoshiHNS Are you thinking of putting different forks on the bike? Yeah eventually.. I know the RC51s are pretty common swaps, are there any others that you could recommend?
- 94 Cafe Project Update on the headers: I've been told from a few guys that this system is pretty rare, it went for over a $1000 back in 90's so obviously it didn't sell much. It looks like its a Two Brothers left exit system. Any more…
- 94 Cafe Project Win6: Cool, if you could let me know that would be awesome. I haven't really put to much thought into that yet, so any info helps right now. JZH & yosh: Heres my current headers w/ a 2 brothers carbon fiber racing…
- 94 Cafe Project Worth a shot... sent you a PM.
- 94 Cafe Project The bike is currently for sale as a whole, but my patients are running out. I originally wanted to do this transformation to a HawkGT but couldn't find a nice solid base to do this build on. I looked for months for a…
- 94 Cafe Project Yeah I might end up just painting it black and leaving a small line to check the level, that's a great idea thanks! Eventually I'd like to find something smaller and with a cleaner look, and still have the ability to…
- 94 Cafe Project I will definitely be asking questions when things come up. Luckily I have great friends with tons of experience modifying cars/bikes etc. I have access to a welder, have tons of tools at home, and not in a huge rush to…
- 94 Cafe Project Another pshop update... Gonna leave the side mount rad out for now, but this is hopefully how it will look. [image: Wheels_zpsa44fbc01.jpg]
- 94 Cafe Project Thanks for the feedback guys. The bike is beautiful as it sits right now stock, but it's just not for me. Also I'll be posting up all the parts in the classified section as soon as I get a list going, PM me if your…
- 94 Cafe Project I've always loved the modern cafe style look, and feel like this bike would pull it off great. I know the direction I want to go, just not sure the best way to get there. I created a quick design in photoshop, and was…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.