Member record · ID 28813
schwarzc
15 posts recovered 3 threads started First seen 19 Dec 2013 Last seen 23 Jan 2020
Threads started
3 in the archiveRecent posts
All 15- RC24/RC36 fuel cut relay - pin assignment RC36B, 1/21/2020 at 2:36 PM If you really want to have a permanent semi-automatic "shortcut", add a simple relay timer triggering when the black/blue wire initially goes high (on rise). Then you can turn on ignition and…
- RC24/RC36 fuel cut relay - pin assignment 59 minutes ago, RC36B Fuel cut-off relay on wiring (4. gen. / RC36/2). From top (as to photo orientation): black/blue (+ to fuel pump) black (+ from fuse) red/yellow (ignition pulse #4) I agree with squirrelbrains - it…
- RC24/RC36 fuel cut relay - pin assignment @Gebruiker: Thanks for the picture, but this I know already. I need a photo of the real conntector since the wiring diagram does not represent the actual situation in the connector (red/yellow is not in the center)…
- RC24/RC36 fuel cut relay - pin assignment Hello! I have a very special question - can anybody with an RC 24 or RC36 tell me, which colour is assigned to which pin on the fuel cut relay plug? I know, that the wires are black, red/orange, and blue/black. And…
- 83 VF750F - Leaky clutch pushrod seal - solution sought Extra O-Ring and new pushrod seems to cure the problem - no leaks until now, ....
- 83 VF750F - Leaky clutch pushrod seal - solution sought I tried the Teflon shrink wrap, but it failed. I run a house brand 10-40 of a local motorcycle accessories shop - no problems with this oil in other bikes, ... Now I applied an extra O-Ring inside the Seal (where the…
- 83 VF750F - Leaky clutch pushrod seal - solution sought Yes, it is the push rod seal for sure. The seal has been installed with the help of a bit in the right size and is in the correct position. Between seal and gearbox cover, I used the blue "Hylomar" sealant. The only…
- 83 VF750F - Leaky clutch pushrod seal - solution sought Hello! Short description: I have a 83 VF750F, and i cant get the clutch push rod seal to seal properly. I changed the seal itself 3 times (2 times aftermarket, 1 time an original Honda part), and it is still leaking…
- 84 VF 750 Tires? I got the BT45s on mine - great tires, ....
- RC15 comstar/comcast rims - information sought Hey! Thanks for the feedback, that is the information, i needed :) I am in contact with the "metal gear" company - they can modify the brake discs, so i can put them on the comstar wheels. I also found comcast rims on…
- RC15 comstar/comcast rims - information sought Hello! I have a 83 VF750F and it hast comstar rims (gold aluminium rim, multi piece, all fitted together with rivets) And I have a problem: I dont get any decent brake discs anymore. There are some used ones around on…
- Is The First Vfr Now A Classic? Here, in Austria, the VFR (86-89) go for less than 2k Euros, ..... I think, there are enough of them on the road, to keep the prices low, and most people here are not aware, that it actually exists. (If I knew, when I…
- More Complex Than What I Am Used To...'86 Vf500F Oh, okay, .... sorry, the bench sync must have slipped my attention (or my abilities of the english language :goofy: ) So, yes - carbs, that are basically synced normally behave better than that. my next steps would be…
- More Complex Than What I Am Used To...'86 Vf500F stupid question, but did you sync the carbs?
- Quick Reference Guide For Earlier Vfrs Steen Here are a couple of european links: www.wilbers.de (suspension - a german company, but with english as a language option I believe I got a Wilbers rear shock in my RC15 - great stuff! If you order from them, you…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.