Member record · ID 29283
bitdivision
10 posts recovered 2 threads started First seen 8 Mar 2014 Last seen 12 Jul 2015
Threads started
2 in the archiveRecent posts
All 10- Wobble On Bumps Over 70 Mph Switchblade The easiest way to check the fork is to loosen the pinch bolts on the top tree and the lower tree and then grab each fork tube and try to twist it, if the do not spin them got bent fork, you do not need to…
- Wobble On Bumps Over 70 Mph Switchblade Bent frame ? Could be. As I said above I measured it as per Haynes. No issues with wheel alignment that I could tell
- Wobble On Bumps Over 70 Mph checksix Front tire worn and/or out of balance (missing wheel weight) ? Nope, it's a little worn but it's not missing the weight.
- Wobble On Bumps Over 70 Mph Thanks for the replies. FJ12Ryder It's also possible that the wheel could be slightly twisted within the forks. You might try loosening the axle pinch bolts and axle bolt, then use the front brake and your weight to…
- Wobble On Bumps Over 70 Mph gig Bent rim? Haven't seen anything obvious but I'll have a close look.
- Wobble On Bumps Over 70 Mph So last year I crashed my 2001, low-sided it in a corner causing it to flip. Crash caused a bent rear subframe and slightly bent front fairing stay (amongst other things). New subframe was installed, and bike was on the…
- Digital Lcd Dash Project Thanks for all the replies and interest guys. Glad to hear people think it might be a good idea. Welcome, keep us posted on the progress, preferably with pictures I will do, nothing much will be happening for a while…
- Digital Lcd Dash Project Wow! Thanks very much Anik. That's perfect! I have a seven inch touch screen on the way which should fit in there nicely.
- Digital Lcd Dash Project Hi Anik, As far as I can see the top two corners are cut off. Could you give me the largest (height) rectangle that would fit in the centre? I just need to know what kind of area I'll be able to put a screen in. Cheers
- Digital Lcd Dash Project Hi All, I'm going to be buying a 5th Gen at some point in the near future (when the right auction comes along) and I have a fairly big project in mind for it. For a long time it has seemed silly to me that motorcycle…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.