Member record · ID 3287
ReZn0r
8 posts recovered 1 thread started First seen 27 Jul 2008 Last seen 29 Jul 2008
Threads started
1 in the archiveRecent posts
All 8- 4th Gen Fork Swap Options VTR forks don't have any compression adjustment and in stock form suffer from hydraulic lock and too light springs. I wouldn't consider these an upgrade except for the ability to adapt better brake calipers. Yes, I…
- 4th Gen Fork Swap Options If you want to keep 41mm triple clamps, 929 calipers and 4th-gen wheel & disks, you've just described the set-up currently on my bike, which was accomplished with VTR1000F forks. I had to do some minor grinding on the…
- 4th Gen Fork Swap Options My premises are: I don�t want to change: brake system (929 one) --> Calipers, hose, pump I don�t want to change: wheel and brake discs (VFR 4Th gen ones) I was reading about F4i forks swap, but the bars are 43 mm…
- 4th Gen Fork Swap Options The caliper is not touching the disc but there are an slight desaligment, I think. I�ve tried to use spacers, etc.. but I can�t put it 100%. I go to circuit sometimes and a improve in suspension will be fine too, so…
- 4th Gen Fork Swap Options CBR600 F3 forks are a direct swap into a 4th gen. The only difference is the length of the axle. The wheel and rotors are identical, and the VFR calipers mount without modification. Yes, I know, but I don�t want to have…
- 4th Gen Fork Swap Options CBR600 F3 forks are a direct swap into a 4th gen. The only difference is the length of the axle. The wheel and rotors are identical, and the VFR calipers mount without modification. Yes, I know, but I don�t want to have…
- 4th Gen Fork Swap Options Hi ReZnOr, For 43mm clamps you could probably fit the following: - 6th Gen VFR800 (from 2002 onwards) - F4i - CBR1100XX Superblackbird I think that considering you wish to keep your VFR front wheel, getting 43mm F4i…
- 4th Gen Fork Swap Options Hi all I�m the owner of a 4th gen VFR and some monthas ago I mead it some mods. I changed the rear shock to use a CBR929 shock. I had to make a little modification in the upper zone to up the bike a little. I�m very…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.