Member record · ID 36360
darkshad
12 posts recovered 2 threads started First seen 27 Jun 2019 Last seen 14 Sep 2020
Threads started
2 in the archiveRecent posts
All 12- Motorcycle not accelerating properly in high RPMs. Alright. Got all of the parts in. Going to work on the motorcycle this weekend.
- Motorcycle not accelerating properly in high RPMs. Alright. Just ordered a MC and SC rebuild kit and also a Barnett Performance Products 303-35-20046 - Complete Clutch Kit. Will rebuild the MC and SC so I have a "known good" set and if I still have the issue, will…
- Motorcycle not accelerating properly in high RPMs. 36 minutes ago, jstehman Did you rebuild the clutch slave and master cylinder when you replaced the parts? No. Rather than rebuilding, I bought used parts off of ebay. 36 minutes ago, jstehman It looks like brake fluid…
- Motorcycle not accelerating properly in high RPMs. Alright....An update. I looked at the clutch fluid and it was a bit high, so I removed some. Per the manual, I tuned the handle bars to the right, made sure the master cylinder was level, and with plastics and top on, I…
- Motorcycle not accelerating properly in high RPMs. Plan on looking at this tomorrow - Saturday. Will let you all know what I find out. Thanks.
- Motorcycle not accelerating properly in high RPMs. Hey, Thanks for the suggestions. I'll look at the clutch and see what I can find out. Thanks.
- Motorcycle not accelerating properly in high RPMs. Hi all. I have a 2002 Honda VFR 800 non-ABS that I’m having problems with. After first gear, when I get on the throttle, the bike’s RPMs just increase without much increase in speed. See youtube video below. Do you all…
- Motorcycle won’t start – fuel pump not getting enough voltage. Hi Grum. Made some good progress today. As I said in the first post, I bought a new ECU, because the motorcycle shop said that the ECU was probably bad. They swapped the ECU to the new one I bought and it still had a…
- Motorcycle won’t start – fuel pump not getting enough voltage. I do have a wire splice in my wiring harness - don't remember if it was something that I did or if it was there before I put it in, but it may have something to do with the FCR not energizing properly. Right now I have…
- Motorcycle won’t start – fuel pump not getting enough voltage. Alright. All four of the videos links should work now. I forgot to hit "publish" on them. When I turn on the ignition on and engine switch on, I get the following voltages (see green). I'm not sure what all of the…
- Motorcycle won’t start – fuel pump not getting enough voltage. Hey, Just wanted to say thanks much for your reply. Please see my comments in purple below. Had a chance over the weekend to perform the tests you suggested and created some short video clips as well. Grum, 6/27/2019 at…
- Motorcycle won’t start – fuel pump not getting enough voltage. I have a 2002 red VFR 800 non-ABS, non-HISS (located in the United States). Have done the pair, flapper, and snorkel mods. Also have power commander V and a fuse box, but these items were removed to help troubleshoot…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.