Member record · ID 37871
neppomuk
10 posts recovered 2 threads started First seen 11 Mar 2017 Last seen 15 May 2019
Threads started
2 in the archiveRecent posts
All 10- 1984 VF500 Project Start Hi, The test was done with the engine already disassembled from the frame. This means also without carburetors and so on, the intake was completely open to suck air 😉 Since all cylinders were pretty much the same, and…
- 1984 VF500 Project Start I also did not believe the values, so after the measurement I tried to check if the gauge is giving correct values. I tried to pump in air with my air compressor and so far, it seems that the gauge itself is giving…
- 1984 VF500 Project Start Today I had some time to measure the compression of the engine. Unluckily it did not show great results. The good news is that the compression is similar on all four cylinders. The bad news is that the values are really…
- 1984 VF500 Project Start Thx Dutchy, this is some good news!
- 1984 VF500 Project Start Hi Dutchy, thx for the information. I know already about the issue with the drain holes. They are already there, I remember it was one of the first things I checked two years ago 😃 Would be nice if you can tell me if…
- 1984 VF500 Project Start Thx for your tip squirrelman, the problem with the clutch happened already two years ago so there was no long storage before, but I also think that the clutch is sticking together for some reason. Anyway, before I start…
- 1984 VF500 Project Start Hello again, some time has passed since I bought my 1984 VF500. You will find my introduction thread here: I would like to continue in the origin thread but unfortunately it was closed. Anyway, not much has happened…
- My 1984 VF500 Hello again, I tried now to remove the carburetors, according to the service manual this should be an easy task =) I removed the airbox and loosened the carburetor bands, but I have no chance to pull them out. Would be…
- My 1984 VF500 Hy guys, sorry for the late reply and thanks for the nice welcome! Yesterday I had some time to pump out the old petrol and to remove the tank from the VF. I disassembled than the petrol tap because I thought it´s maybe…
- My 1984 VF500 Hello everybody! My name is David and I am from Austria (Austria not Australia ;). 20 years ago my dad had a VF500 and in the last few month i tried to buy his bike back from the current owner. Because my Dad died…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.