Member record · ID 40321
CurtBrass
5 posts recovered 1 thread started First seen 28 Apr 2019 Last seen 30 Apr 2019
Threads started
1 in the archiveRecent posts
All 5- Voltage to ECM? Hi Grum, Thank you for all the knowledge. I'm a complete novice at this stuff, and this forum is an invaluable resource. Here's a synopsis of my issue. Maybe more detail than necessary, but one of the details might be…
- Voltage to ECM? Thank you! I’m glad that I waited for someone who knows their way around this! I’ll check through the bank angle and kill switch.
- Voltage to ECM? [image: image.png.551c9d5b127f966320a481836519bda6.png] Yeah, so when I test the output at the starter relay switch, I am getting 12+ volts at the red wire, but only 0.50 at both the Yellow/Red and the Green/Red.…
- Voltage to ECM? I'm getting no power from the ECU to my Fuel Cut Relay and my Engine Stop Relay via the Black/White wire. I tapped the Black/White wire out of the ECU and no power there. So I checked the voltage in and only getting…
- Voltage to ECM? What is voltage that I should be getting to the ECM? Coming out of the 30 Amp Main fuse A, I am getting 12+ volts at the red wire, but only 0.50 volts at both the Green/Red and Yellow/Red wires.
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.