Member record · ID 42195
GearDriven
5 posts recovered 1 thread started First seen 25 Jul 2020 Last seen 29 Jul 2020
Threads started
1 in the archiveRecent posts
All 5- 1996 VFR750 Carb Woes from CA Would like to update that I've readjusted the a/f screws with the bike running and it's drastically improved! I did the ol' turn-while-idling-and-wait-for-response method. 3/4 carbs were fine at the factory setting of…
- 1996 VFR750 Carb Woes from CA Thanks for the suggestion. Symptoms are the same with the canister connected & disconnected. There're no liquids inside.
- 1996 VFR750 Carb Woes from CA Blocking that port does not allow the engine to rev up at all. That one is the No. 6 Tube in the attached diagrams. To me, it looks like when the intake runner (No. 10 Tube) is pulling vacuum, that allows free-flow…
- 1996 VFR750 Carb Woes from CA Thanks all - I forgot to mention that I did replace the foam in that filter with some low density stuff, and also tried running without it attached and had the same symptoms.
- 1996 VFR750 Carb Woes from CA Symptoms: The engine speed decreases at a constant throttle position (under no load) - video posted. Under load, the bike pulls hard at WOT, but does not respond for several seconds when the throttle is chopped off and…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.