Member record · ID 422
BKMDNO
6 posts recovered 1 thread started First seen 26 Mar 2012 Last seen 27 Mar 2012
Threads started
1 in the archiveRecent posts
All 6- Clutch will not engage & Mytevac will not work Thanks to the responses I received, I do not have to pay a shop bill. I ended up letting the bike heat up until the cooling fans kicked in. I was going to ride it down the street and see if I could get the clutch plates…
- Clutch will not engage & Mytevac will not work I was thinking that might be a bad idea. I'll have to try that. I just need someone with me to give me a push so I am rolling when I bump it into first to keep it from dying.
- Clutch will not engage & Mytevac will not work Squirrel man, just so I make sure I do it right, I need to throttle uP on the center stand and grab the brakes hard with the clutch in? I have killed the motor about five times by applying the rear brake but it was at…
- Clutch will not engage & Mytevac will not work Yes I can get it into neutral but when the rpms are up I can not. I took the bolts out of the slave cylinder and tapped it with a mallet and it would not come off. The parts store is closed today and I believe I would…
- Clutch will not engage & Mytevac will not work I know it is not the kickstand switch. I have had it running and in gear on the center stand. I then pulled the clutch in and applied the rear brake. This killed the engine as the clutch did not disengage the motor.…
- Clutch will not engage & Mytevac will not work I have a 2002 VFR and it has been sitting in my garage for the past 5 months due to weather and other issues. It has been started several times during the period but not moved. I started it up and when I put it in gear…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.