Member record · ID 42712
SpookyDriver
8 posts recovered 1 thread started First seen 21 Mar 2021 Last seen 1 Sep 2021
Threads started
1 in the archiveRecent posts
All 8- Hesitation/Stumble between 3-4K - Delkevic Exhaust with dB Killer.... My 8th gen had similar stumbling issues after I installed an Arrow exhaust. Luckily, I already had a Power Commander on order and it fixed the issue completely once I had the correct map loaded. Actually, it's even…
- 2014 VFR1200FD - Front break pressure and disk pads Definitely a no to both questions. As stated above, sounds like you need a brake service ASAP. Dragging brakes can lead to overheating and brake failure. Might as well do the rear brakes, as well.
- Lowered Peg Questions - Brake Pedal Clearance Decided to order a set of the BLS blocks after almost dumping the bike when my boot got hung up on the Knight's pegs. Until the BLS blocks arrive and I can reattach the OEM pegs, I've wrapped the Knight's with gaffers…
- I like my 8 th gen VFR , but.................. I feel the same way. I've had dozens of supersport, sport-touring and adventure bikes in the last 40 years and my 2014 VFR is the worst I've owned from an aural standpoint. The OEM exhaust's tone is too high-pitched. I…
- Lowered Peg Questions - Brake Pedal Clearance BusyLittleShop, 3/25/2021 at 4:20 PM Peg Blocks are specially designed using billet 6061 T6 aluminum for the VFR800 years (5th Gen 98 to 01) and (6th Gen 02 on 09) and (8th Gen 14 on up)... they will effectively lower…
- Lowered Peg Questions - Brake Pedal Clearance 2 hours ago, Cogswell There are probably as many or more lowered pegs on G6s as G8s, and AFAIK the step hardware is the same. On mine I used a small cutoff wheel to take 1 to 1 1/2 threads off the master cylinder…
- Lowered Peg Questions - Brake Pedal Clearance 2 hours ago, Thumbs Before you go spending money have you tried the changing seat the seat height ....front on low, rear high and vice versa? I had my seat reupholstered and the seat padding raised by 1” which is much…
- Lowered Peg Questions - Brake Pedal Clearance I recently found a "new, old-stock" 2014 VFR800 at a local Honda dealership and brought it home. I love everything about the bike except for the peg height since my 50yr old knees aren't quite as flexible as they used…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.