Member record · ID 43489
AnfernyRocks
8 posts recovered 1 thread started First seen 14 Apr 2021 Last seen 30 Apr 2021
Threads started
1 in the archiveRecent posts
All 8- 6th gen VFR800 surging gone with IAT unplugged? UPDATE, APRIL 29, 2021 I don't have a ton of time to tinker, so I just rode my bike with the IAT sensor unplugged while I waited for a new one. I finally got the new one installed and.....solved, I think! I've only…
- 6th gen VFR800 surging gone with IAT unplugged? 15 hours ago, Grum With the IAT unplugged aren't you seeing a flashing 9 code? Something definitely wrong if you're not! With the IAT unplugged the ECM will assume a default temperature of 25degC 77degF. Actually the…
- 6th gen VFR800 surging gone with IAT unplugged? 7 hours ago, DannoXYZ That typically points to O2-sensor as being issue because ECU will stay in open-loop with rich AFR. Only when everything's warmed up will it consult O2-sensor feedback and go into closed-loop…
- 6th gen VFR800 surging gone with IAT unplugged? A vacuum leak is a distinct possibility. I ordered some vacuum line and will be pulling the throttle body in order to replace as much of it as I can. The bike is nearly 20 years old at this point and just needs new…
- 6th gen VFR800 surging gone with IAT unplugged? Yeah, that's a typo haha. 330 ohm resistors per the instructions I found elsewhere on this board. Right now my action plan is just to replace the IAT sensor and test. Will report back ASAP.
- 6th gen VFR800 surging gone with IAT unplugged? I have both O2 sensors unplugged and have 30 ohm resistors in place. I guess I'll start by replacing the sensor since it's fairly inexpensive at $35. I would love for the issue to be a bad sensor, but wouldn't it throw…
- 6th gen VFR800 surging gone with IAT unplugged? So far I haven't gotten the key trick to work for me. Installing the power commander did help a little, so now I guess I just need to figure out how to build a tune around however it is my bike is running without that…
- 6th gen VFR800 surging gone with IAT unplugged? I bought my first VFR in February and I love it, but...it has that surging issue that I've seen a lot of people dealing with. I finally broke down an installed a PCV and installed the stock Dyno tune. That did help, but…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.