Member record · ID 49581
Timuli
9 posts recovered 1 thread started First seen 28 Apr 2024 Last seen 4 Jun 2024
Threads started
1 in the archiveRecent posts
All 9- what have you done in the hope of increasing the powers Again a new dyno pull was done and adjusting the lobe center of the camshafts did not affect anything. I have to call the camshaft maker tomorrow and ask if he can tell me what steps the cams should be set to. And then…
- what have you done in the hope of increasing the powers Now the camshafts were adjusted to hopefully working values. I can say that adjusting the witch's cam shafts is not an easy task for a first-timer, but it's also done now. Hopefully I can get to the dyno this week. At…
- what have you done in the hope of increasing the powers Now it was time to test the differences between the original and self-made exhaust pipes. Homemade seems to work a little better. The redline is the original exhaust Next, we'll get to work getting the degrees on the…
- what have you done in the hope of increasing the powers 10 hours ago, gropula That is usually a sign of valve clearances being tight. What were the clearances? Did you increase the lift by grinding the base circle of the cam or by welding and then regrinding the lobe? It is…
- what have you done in the hope of increasing the powers Today I visited the dyno and now the camshafts are in their original settings. I don't really like the result. Next I have to go and try the dyno with the original exhaust pipe, so that if that homemade exhaust pipe…
- what have you done in the hope of increasing the powers Well, the first dyno didn't go very well, horsepower dropped by 7hp and torque by 5nm over the entire rev range. We stated that we need to set the timing of the exhaust cams to the original numbers and try again. On…
- what have you done in the hope of increasing the powers Removing the V-Tec valve is quite simple. The machine itself fits the pins into the valve locking hole. they can be of such a size that the spring goes to the bottom (the valve now catches the pin and cannot move…
- what have you done in the hope of increasing the powers Well, I did a small test drive of about 5 kilometers, everything works at least for now. 20240429_183534.mp4 I didn't want to go far when the air is like a 4 degrees warm and it's raining a little. At the end, I gassed…
- what have you done in the hope of increasing the powers Greetings from Finland I thought I'd put here a little of what has been done to my beloved motorcycle over the years, especially in terms of power increase. the first two pictures show the difference between the old…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.