Member record · ID 49777
Flister
3 posts recovered 2 threads started First seen 29 Jan 2024 Last seen 16 Dec 2024
Threads started
2 in the archiveRecent posts
All 3- Deluxe 8th Gen headers? Just before I was finally able to pull the trigger on some Lextek headers, I read from someone saying it won’t fit the Deluxe model because the center stand is in the way. After looking at Delkevic they also list their…
- Clutch RPM problems Grum, 1/29/2024 at 6:01 PM Firstly, make sure your warm engine idle is set to 1200rpm. The idle speed adjustment knob is just forward and above the clutch slave cylinder. And yes, there is the launch assit function that…
- Clutch RPM problems This may be a dumb question but I can’t seem to find a solid answer. I have a 2015 year model and noticed that when pulling in the clutch it disengages but the RPM’s will drop only partly, but not all the way. If pulled…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.