Member record · ID 50006
SABen
9 posts recovered 1 thread started First seen 18 Apr 2024 Last seen 22 May 2024
Threads started
1 in the archiveRecent posts
All 9- Kill switch not stopping engine Additional wire disconnected and all works as it should. Started checking all the connectors on the right of the bike and they looked like new, no corrosion, all still nice and shiny. Sprayed them all di-electric grease…
- Kill switch not stopping engine Time just doesn't seem on my side. At last got the a gap to get the right fairing off and immediate found non factory cabling. There is a wire running from my red&black ignition wire to the brown wire on the fuel pump.…
- Kill switch not stopping engine Previous owner left everything to dealers, I showed him some faults he was not aware of when viewing the bike so not much there Will remove the fairings this weekend and start measuring and tracing and checking for…
- Kill switch not stopping engine 7 minutes ago, Grum RIGHT - This explains part of the Fault. The Ignition Switch is faulty or you have a Red wire to Red/Black wire short, powering Fuses C,D,E, and F. Refer Ignition Switch wiring on previous diagram.…
- Kill switch not stopping engine 1 hour ago, ShipFixer Both my kill switch and ignition key switch were dirty. I had intermittent connectivity through them which caused some random and inopportune shutdowns. It's possible that you could have something…
- Kill switch not stopping engine 14 hours ago, WDIV Not to be discouraging at all but I'm glad I'm not the only one who bought a VFR and is dealing with some wackadoo problems lol Second hand vehicles, esp. ones that are over 20 years old - You know…
- Kill switch not stopping engine 19 hours ago, Grum Questions.. - With the Engine Running. Then turn Off only the Ignition Switch (assume the engine continues to run). Do the Headlights go Off and the Instrument Panel go blank? - And with engine…
- Kill switch not stopping engine Hi Grum Thank you for the reply Private sale, so no dealership. When kill switch is in the Off position the engine does not crank. It seems I need to start with Fuse C and the Engine Stop Relay. I will give feedback…
- Kill switch not stopping engine Good afternoon to all Viffer fanatics. I bought a 2002 VTech about three weeks ago and the bike is a gem. Few small things I will fix on her, some already done. My biggest headscratcher however is my kill switch /…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.