Member record · ID 1407
mack82097
7 posts recovered 2 threads started First seen 10 Oct 2011 Last seen 19 Nov 2011
Threads started
2 in the archiveRecent posts
All 7- Easy 12v power source I went ahead and wired a Powerlet port in to the right cowling. It's direct to the battery. Actually a lot easer than I thought. The 48" powerlet panel kit fits perfectly.
- Easy 12v power source Hello, Anyone find an easily accessible 12v power source, either switched or constant, on the VFR1200? I want to wire in my Garmin but rather not take off body panels to run the power to the battery. Maybe someone found…
- Power Commander issue? [image: View Post]phobe, on 11 October 2011 - 01:36 PM, said: The "alarm" noise you're describing is just pressure being relieved from the fuel pump pressuring up when you turn the key on. I've heard it described in…
- Power Commander issue? A tech from Dynojet hooked up to my PC V via remote desktop. All was working fine, and the voltages for my TPS were within spec. He couldn't explain the noise, although the bike still made the noise even after the PC V…
- Power Commander issue? [image: View Post]phobe, on 10 October 2011 - 06:28 PM, said: Your throttle position indicated by the PC5 should go from 0 to 100. If it's out of sync, it might not hurt anything but it definitely won't allow the PCV to…
- Power Commander issue? I'm going to pull the bodywork and reattach the TPS wire. Maybe I'm using the supplied wire tap incorrectly.
- Power Commander issue? Hello all, I'm new to the 1200 and I just went through a 3 hour ordeal of installing a Power Commander V. The hardest part was the installation of the O2 optimizers. I have some issues with the Power Commander that I'm…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.