Member record · ID 14450
tbailey
9 posts recovered 3 threads started First seen 26 Aug 2008 Last seen 2 Jun 2009
Threads started
3 in the archiveRecent posts
All 9- Recommend A Tank Bag Thanks so much.... great options... will be looking at them all carefully. :-)
- Recommend A Tank Bag Heya... Can anyone recommend a good tankbag for a 6th gen? I've got the factory hard saddles but would prefer to just put them on when doing long hauls. Looking for something to stuff a couple of groceries and odds and…
- Step-by-step For Headlight Bulbs [image: View Post]VIPERon, on Aug 29 2008, 06:19 AM, said: [image: View Post]checksix, on Aug 29 2008, 08:49 AM, said: Howto article in the FAQ section: http://www.vfrdiscus...;showarticle=19 My advice would be to…
- Step-by-step For Headlight Bulbs Hey guys... Does anyone know of/have step-by-step instructions for changing out headlights on an 03 viffer? My bro-in-law just bought me some nice bright V4 halogens Thanks! ps. I've never removed any of the cowling…
- Autocom Wiring Into Brake Light Ok... so seeing as this thread is a wealth of info... I'm having trouble getting my hands on 18guage wire. Would 16 work ok? And would it matter if some was 16 and some was 18? The fuse holder I bought has 16... so if I…
- Autocom Wiring Into Brake Light [image: View Post]Tightwad, on Aug 25 2008, 10:49 PM, said: I believe the relay advise is spot on, but 30 is positive to battery, and 87 is switched to accessory. 87a would be reverse switched...devise is on when bike…
- Autocom Wiring Into Brake Light [image: View Post]Tightwad, on Aug 25 2008, 07:14 PM, said: I am betting it is a relay he is powering, and not an actual connection. I am 99% certain it is the blue-red wire you need, although it is supposed to be…
- Autocom Wiring Into Brake Light [image: View Post]Knife, on Aug 25 2008, 06:35 PM, said: I had to refer to the wiring diagram in the manual for my '98. I'm an electrical dummy, but I was able to figure it out. Thanks.... a manual never came with my…
- Autocom Wiring Into Brake Light Hi, I have an 03 VFR non ABS, and a new Autocom Active Duo system. It seems like it would be a simple install, but I am a complete novice. It says: "Connect Red (pos) wire to a recommended, switched ignition, fused…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.