Member record · ID 1523
rjsjr
5 posts recovered 1 thread started First seen 8 Apr 2010 Last seen 30 Apr 2010
Threads started
1 in the archiveRecent posts
All 5- Reusing Heated Grips I tried and failed when switching from stock bars to convertibars. though it isn't too hard to get the plastic backing material to come off in one piece if it stretches or deforms much it will cause the underlying metal…
- Convertibars Mounting on 5th Gen Oh, and even with the 90 degree bend speigler lines they sell with it you'd have the reservoirs hitting the top of the fork adjusters at 3.5" of rise, so basically this is adjustable only in the more relaxed than stock…
- Convertibars Mounting on 5th Gen Sigh, that's what I was starting to think having spent the last couple weeks trying any number of positions with the bars and orientations of controls. Looking carefully at the VFR photos on their site it's not apparent…
- Throttle tube removal There's a metal pin on the bottom of the assembly that mates with a small hole in the bar end and keeps the throttle tube from rotating when you twist it. Gently angle the throttle tube down on the inside (towards the…
- Convertibars Mounting on 5th Gen I'm in the process of installing convertibars on my 00 VFR and wondering how people have oriented their installation? Photos would be ideal, searching around I've seen some 6th gen pics, but nothing from the 5th gen. I…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.