Member record · ID 159
AzizaVFR
6 posts recovered 1 thread started First seen 11 Dec 2002 Last seen 4 Dec 2007
Threads started
1 in the archiveRecent posts
All 6- Why Not Aluminum? Aluminum will work just fine. All metal will dent, get dirty and need to be cleaned/polished. If you can get the pipe+PC III for the same price as the Ti unit, get the extra toys.
- Hid installation The H4 kits you see out there are not a true dual element HID set. It has a HID bulb and ballast for low beam, while a second halogen is put in the same general location as the high beam filament would be in a normal H4…
- Hid installation Lee, After having my share of the fancy H4 bulbs quit working from the excessive vibration motorcycles can induce, I can see your concern. What happens to the halogen bulbs is the filament gets stretched and/or brittle…
- Hid installation If you use the same type of bulb for separate high and low beams, you can get the kits for less than $400 complete. The hardest thing about the kit is mounting the ballast. They are about the size of a 3.5" floppy and…
- Hid installation The price breakdown is as follows: K2 8000K H4 HID kits - $390 x 2 PIAA P1000XT lamps - $157 (Normally $239) 5200K H3 HID bulbs - $170 PIAA Solitaire 001 lamps - $50 Brackets - $2 for the 3/32" scrap aluminum from a…
- Hid installation I have completed the HID installation on my VFR800. I have posted the info here: [image: h4_comparison.jpg] border='0' alt='user posted image' /> (screen.width/1.75)){this.width = (this.width/1.75)}" onclick="java…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.