Member record · ID 19111
aceperk
9 posts recovered 1 thread started First seen 11 Nov 2009 Last seen 11 Nov 2009
Threads started
1 in the archiveRecent posts
All 9- VFR CBR WHEEL QUESTIONS 99 vfr front rim hub is 4 1/4 in wide, with the same rotor bolt pattern as the cbr1100xx
- VFR CBR WHEEL QUESTIONS Checking with Delkelvic in CO. Randy was aware of rotor bolt pattern difference but not hub width. On line now with him checking with engineering or going o pull a wheel. The wheel I need is Delkelvic part number PR…
- VFR CBR WHEEL QUESTIONS Now, if it is an F3 rim, are the 97's and 98's different? I have read they were, but can not verify. Custom aint easy
- VFR CBR WHEEL QUESTIONS Too much confusion on the cbr900 16 vs 17 intel. wikipedia said all 16's, but I tend to believe you. I know for a fact that the 1997 F3 wheel is NOT the same as what I have. The 97 has a 4 1/4 in hub, the one I have is…
- VFR CBR WHEEL QUESTIONS I have been reading a great deal and did try to research the EBC catalogue when I honed in that the blackbird rotors had the diameter and proper off set for the rotor carriers. Is the 98 F3 rim different than the 97 F3…
- VFR CBR WHEEL QUESTIONS The application is a 91 GSXR 750 fork set. I have the right wheel, I just need to know what it came off of to get a few more. The proper rotor location hole on the hub is 58mm in diameter. Wheel is 17in x 3.5in small…
- VFR CBR WHEEL QUESTIONS On a steep learning curve here. I was unaware/unsure if the 900rr came with the 6 spoke 17in rim. I thought they were all 16in. Set me straight on that please. The wheel I need looks like this, but has a 4in wide hub,…
- VFR CBR WHEEL QUESTIONS The wheel I am using as a mock up for my custom looks like the late model f3, has a 4in hub and a DIFFERENT rotor bolt pattern than a vfr800 or cbr1100 xx rotor. The wheel I need came of a custom 93 CBR900rr that had…
- VFR CBR WHEEL QUESTIONS I am a new memeber to this forum, but I am impressed with the good intel that you provide. I am the owner of www.gsxronly.com and I am working n a custom. I have a vfr front wheel (02) that has a 4 1/4 in hub (rotor…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.