VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 21646

SottoNC30

7 posts recovered 1 thread started First seen 12 Jan 2011 Last seen 18 Jan 2011

Threads started

1 in the archive
  1. No neutral when Vfr is warmed up. SottoNC30 12 12 Jan 2011 18 Jan 2011 SottoNC30 · 12 Jan 2011 – 18 Jan 2011

Recent posts

All 7
  1. No neutral when Vfr is warmed up. 18 Jan 2011 12:44 Had a leak (leak started end of last year, been topping up my oil ever since), coming from beneath the gearbox. I degreased and cleaned cleaned the area initially and gave it another ride, trying to establish the source…
  2. No neutral when Vfr is warmed up. 14 Jan 2011 08:52 That was my initial plan but I am falling into that trap (as you can see), thanks for the reality check, much appreciated. Just have to slow my roll for now.
  3. No neutral when Vfr is warmed up. 13 Jan 2011 19:37 Coffeebrake you beauty. I'll have a look look if they line up tomorrow. Still want to get some new parts though (like hoses, bolts even new fairing everything looks a bit shabby at the moment), for my rebuild its gonna…
  4. No neutral when Vfr is warmed up. 13 Jan 2011 17:11 Timmy that was some good advice about giving it some gas before changing to to neutral, it actually worked. Had a look at the clutch step and link rod. On the step there is too much play on the foot selector, meaning…
  5. No neutral when Vfr is warmed up. 13 Jan 2011 14:54 yes before i start the bike i can get neutral easily. I found that if i roll the bike back a bit before i select neutral its even better to get too. Thanks Timmy I'll see what i can do. My clutch is getting a bit soft…
  6. No neutral when Vfr is warmed up. 13 Jan 2011 07:55 The clutch is not hydraulic it's cable operated. I was going to get new steps for both break and clutch anyway maybe I should do it sooner than later. The bike model is nearly 20 years old, they are the VFR RC 30 but in…
  7. No neutral when Vfr is warmed up. 12 Jan 2011 16:25 Hi guys recently bought a Vfr 400 NC30, it drives like a dream the only issue I have is that either the gearbox, or selector doesn't want select neutral when the motor is either running or the bike has been driven warm.…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.