Member record · ID 24495
TotalEclipse97
13 posts recovered 4 threads started First seen 20 Mar 2012 Last seen 5 Sep 2012
Threads started
4 in the archive- Ducati 900ss forks - 3rd Gen VFR TotalEclipse97 · 15 Aug 2012 – 15 Aug 2012
- Acceptable Replacement Radiator for a '93 750 TotalEclipse97 · 3 Aug 2012 – 5 Sep 2012
- 3rd Gen Fork Swap - Compatability TotalEclipse97 · 16 May 2012 – 16 May 2012
- Advice on underseat exhaust mod to my '93 VFR750F TotalEclipse97 · 20 Mar 2012 – 20 Mar 2012
Recent posts
All 13- Acceptable Replacement Radiator for a '93 750 Got the new radiator installed with my brother (good bonding time). Didn't have any issues. Got it fired up and took it for a spin around the block....still pretty shaky seeing as this is first time i've ridden since…
- Acceptable Replacement Radiator for a '93 750 Finally getting around to installing the newer radiator and res tank. Does anyone know if there is an air-bleed screw on the '93 or can i just run it and the air will work its way out the top?
- Ducati 900ss forks - 3rd Gen VFR Duc - Thanks a ton. I was sure that I wasn't the only one that had that crazy idea. Sounds like there will be a few more 900ss forks on ebay soon. I was thinking there may be a way to fab some upper triples that ended…
- Ducati 900ss forks - 3rd Gen VFR Looks like 50mm uppers and 53 or 54mm lowers. I'm thinking that i'll run into issues with the overall height as well as affording support parts (brakes, wheel, etc).
- Ducati 900ss forks - 3rd Gen VFR Just took a closer look and I now see the factory change in diameter on the forks. I'll try to dig up exactly what year/model they are and then get factory specs on dimensions. Fork length looks to be about 3"…
- Ducati 900ss forks - 3rd Gen VFR I'm new to this so please bear with me.... Wouldn't the Upper Dia (50mm) dimension be the same as the Lower Dia or are forks known to be tapered? Upper being the Upper Triple and Lower being the Lower Triple or steering…
- Ducati 900ss forks - 3rd Gen VFR I've come across a set of forks from a 900ss ducati. My friend found them in his garage years after an ebay buying binge. The only info i have on them is that they would fit a duc 851, 888, 750ss, and 900ss. They're…
- Acceptable Replacement Radiator for a '93 750 Just got a replacement radiator in the mail. Hooking it up tomorrow evening and hopefully going to go enjoy some of this cool 75F weather.
- Acceptable Replacement Radiator for a '93 750 ebay has a few up and price is roughly $150 shipped to my door. this sounds reasonable, but this is also the first time i've had to price out a rad for any of my bikes. thoughts?
- Acceptable Replacement Radiator for a '93 750 Excellent! Much appreciated Finn
- Acceptable Replacement Radiator for a '93 750 I recently laid down my naked '93 750 and in doing so, shattered the Radiator Reservoir and ripped off the end of the stock Radiator. I got on good ol' eBay in hopes of finding a replacement. No '93s available. Does…
- 3rd Gen Fork Swap - Compatability Hey all, i'm looking at doing a fork swap on my '93 750. I've seen alot of posts regarding fork swaps, but i'm still shy on some info before i start the project. I'm looking for the best bang for my buck. I'm ok with…
- Advice on underseat exhaust mod to my '93 VFR750F Hey all, i'm new to the site and just picked up a '93 VFR750F. It's been wrecked a number of times and it's finally found its way into the hands of someone willing to give it the TLC that it deserves. The engine runs…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.