Member record · ID 26573
VFRLuvr
10 posts recovered 4 threads started First seen 19 Aug 2014 Last seen 8 Nov 2016
Threads started
4 in the archiveRecent posts
All 10- Lost Keys Hi All, I lost my last remaining key of my beloved VFR. I called a "factory authorized" Honda shop and the guy seemed absolutely perplexed as to what to do. I called a lock smith and they said they could make a key from…
- Completed My Lsl Handlebar Conversion Thanks VFROr, I used those cables too. Part numbers: 17910-MCS-D90 17920-MCS-D90 These are exactly the same as the stock cables but are 2-3" longer. They allow the lines to be routed in the stock position.
- Completed My Lsl Handlebar Conversion Rigger, yeah, over the steering head and then down and under the frame seems to be the way to go. Thanks.
- Rear Header/exhaust Removal? Nevermind, I skipped the step on 2-29 "Remove the right footpeg holder and heat guard..."I assumed I'd access the left header from the left, but it turns out you access the left header directly through the the heat…
- Rear Header/exhaust Removal? The "special bolts" came off the Motad exhaust header studs on the rear left header, which is the absolutely worst header to access. The flange rattles and I'm pretty sure the header not being bolted down is what's…
- Clutch Never Fully Disengages Awesome, guys, thanks! I will try all that stuff. I forgot to say what was damaged in the crash. Don't worry, I broke her fall. I edited the first post with crash damage. I would have expected the revs to drop in first…
- Clutch Never Fully Disengages I was putting the bike back together today after a crash and noticed that when I have the clutch fully pulled in the rear tire still moves when on the kick stand. On the test ride, at a red light, 1st gear, clutch in,…
- Completed My Lsl Handlebar Conversion Ha, I've been working on this install today. 2006 ST1300 throttle cables should work. BikeBandit has them. I had an order for a set (roughly $50 after shipping) but canceled after rerouting my throttle cables as…
- Aftermarket fairing kits I'm not worried about color matching, if I go with the knock-offs I'll do the whole set. I'm looking at a two tone matte green/black that looks pretty neat. I don't mind a little 'coaxing' to get the pieces to fit, but…
- Aftermarket fairing kits Does anyone have experience with the aftermarket fairing kits on Ebay? I'm looking at the straight out of Hong Kong Chinese kits, for instance, Heyman brand. I low-sided my 2006 and knocked a few bits off the left side.…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.