Member record · ID 27298
PFox
15 posts recovered 1 thread started First seen 27 Apr 2013 Last seen 22 Sep 2014
Threads started
1 in the archiveRecent posts
All 15- Generic Fuel Pump turn off the gas.. run the bike .. tap the float bowls.. turn gas back on.. go ride. Tried that. Didn't work. Got the bike home, I'll dig in tomorrow before work. Sent from the Future via Google Skynet
- Generic Fuel Pump I'm going to have to open up the carbs, I think. With a full tank of fuel and a bypassed pump opening the petcock results in fuel pouring out of the carburetor assembly. I'm guessing I have a stuck float at a minimum.…
- Generic Fuel Pump I already have an extra filter in place, but I'll bypass tomorrow before going to work. Between 4.5 and 5.5k it feels like it surges been normal power and half power, above that it's just a whole lot of extra noise and…
- Generic Fuel Pump I hadn't. If they need replacing, where would I buy them? Sent from the Future via Google Skynet
- Generic Fuel Pump So I'll top off (I have 120 miles on this tank already) then see if that resolves my issue... THEN start worrying about carbs and parts.
- Generic Fuel Pump tool oil would be best. one of the slides may not be installed perfectly thats why you need to run it and check . :wink: Wouldn't an improperly installed slide show up well before now? The stumble started two days ago…
- Generic Fuel Pump Thanks. I checked the valve adjustment not more than 500 miles ago, did filters and oil then too. I'll run it to check the slides, they "felt" fine when I was in there. I know they're enrichment valves, but it's so much…
- Generic Fuel Pump So, if I understand the above posts correctly, a contemporary CBR pump will work on a 700? I'm having a surging/stuttering issue at anything above 4500 RPM, or high loads in general. Cracking the choke a little smoothes…
- '86 700 Interceptor, Looking For Some Pieces Hey guys, more parts questions. She needs mirrors. The ones on there are so cracked and stiff that I can't adjust them for fear of breaking them. Add in that I'm looking at my elbows 90% of the time, unless I lay down…
- Usb Power! I like the Powerlet stuff, although it is pricy. I just put the bar mount BMW style on my CRF direct wired to the battery so I could backfeed with the Battery Tender. I didn't even think of that angle. Hmmmm... my BT…
- Usb Power! If I may step in, the current draw and power loss from a regulator not plugged into anything is going to be miniscule. With something like this, we're talking milliwatts at most, and even that's just so the tiny chip…
- '86 700 Interceptor, Looking For Some Pieces enuf Centerstands on Ebay have been hot and cold, there have been posts that have not sold for $50 and there have been sales for over $200 hold tight and one will appear in time. Good luck. It took me a while to get…
- '86 700 Interceptor, Looking For Some Pieces I tried BB, Service Honda, Honda of Hollywood, etc: main stand is listed as "discontinued" though I can still buy the tube portion. Oddly enough the SPRING is also listed as "discontinued." It's a spring, guys, and they…
- '86 700 Interceptor, Looking For Some Pieces Greetings! I recently picked up an '86 700. I loved the concept and the looks before the purchase, but the test ride the PO took me on (insisted on it even, she's awesome like that) sealed the deal and meant that this…
- Some wallpapers And some more..... [image: 89686845.jpg] I really would love to pick one of these up as a second bike. I love that partially faired look, and the engine looking two steps from industrial is badass!
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.