Member record · ID 29411
toe1959
12 posts recovered 3 threads started First seen 11 Apr 2014 Last seen 18 Mar 2015
Threads started
3 in the archiveRecent posts
All 12- Forums keep up the good work, very nice project, been doing a replica using nc35 fairings and exhaust. Attached Images [image: DSC04962.JPG] [image: DSC04963.JPG]
- Vfr750 rc45 replica All sorted now, rad and oil cooler in the same place as before with just some mods to the under side of the top fairing and the v panel in front of the rad, ordered a digital dash and a new screen, Attached Images…
- Vfr750 rc45 replica hi, its all after market, fibre glass but not in bad nick, only bit of tyga on this is the screen brace from a old rvf400 I crashed, my mate as a full tyga body kit with lights and rear sub frame, from my old bike.…
- Vfr750 rc45 replica changed the lines on tank and fairing, going to use this paint style fitting a digital dash then book a track day at oulton pk, see how it goes. Attached Images [image: DSC04922.JPG]
- Rc45 Replica Exhaust Left Hand Mod 4Th Gen using the rear end exhaust from a nc35 and front pips from the 750 all works fine, just need my mate to sort the welds out. Attached Images [image: DSC04882.JPG] [image: DSC04881.JPG] [image: DSC04880.JPG]
- 4Th Gen Rc30 Replicas Hi The tank breather is standard on the nc30 tank, its a lot smaller tank than the rc30 one, the rear wheel on mine will have a plastic hub nut, and white bolt covers, just sorting that now. if you can still get the…
- 4Th Gen Rc30 Replicas A member of our forum over here in Spain just finished building one: [image: j2df.jpg] All credit to AlohaSpeedShop. very nice job, need to get a good paint job like yours, and a vtr1000 clutch master cyl, nc30 brake…
- 4Th Gen Rc30 Replicas That look great! The left-exit exhaust is rare, too. They seem to be missing the NACA ducts, though. :goofy: Hi whats a NACA duct ?
- 4Th Gen Rc30 Replicas Pretty sweet !! I think the RC30 is one of the best looking bikes ever made. I wonder what a replica like those cost. Rollin so far stands me at around £1600 on each bike, fairings are hard to get.
- Vfr750 Rc30 Body Kit Nice work, good job on the tanks, how did you manage that? on the road bike nc30 tank and seat unit with a old damaged fibre glass fairing off ebay, cbr900 clocks, track bike rc30 track fairings nc30 tank, a lot of work…
- 4Th Gen Rc30 Replicas one road, one as a wet track bike, Attached Images [image: DSC04633.JPG] [image: DSC04626.JPG] [image: DSC04640.JPG]
- Vfr750 Rc30 Body Kit my 94 vfr750s rc30 replica fairings using one for the road, and one as a wet track bike, all good fun. Attached Images [image: DSC04633.JPG] [image: DSC04638.JPG] [image: DSC04639.JPG]
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.