Member record · ID 30741
Redbike
24 posts recovered 5 threads started First seen 19 Jul 2015 Last seen 17 Oct 2021
Threads started
5 in the archive- Engine cooling Redbike · 10 Oct 2021 – 17 Oct 2021
- Vibrations at higher load and RPM, specially with passanger Redbike · 15 Sep 2021 – 20 Sep 2021
- How The Abs Should Work On A 06.vfr800A Redbike · 19 Aug 2015 – 20 Aug 2015
- Melting-Hot License Plate Frame Redbike · 23 Jul 2015 – 23 Jul 2015
- Vtech Behaviour Redbike · 19 Jul 2015 – 21 Jul 2015
Recent posts
All 24- Engine cooling ggtod, 10/14/2021 at 8:53 AM I admit it look rough but people install mesh guards that give the same effect, no? Also if the thermostat is stuck open wouldnt that cause slow warm up time and running cooler causing the…
- Engine cooling Thank you for your comment. My bike is manual. This morning I checked the warm up process from 8C again and scanned some point on the bike with thermometer. I found the the big black water hoses from the water pump are…
- Engine cooling I checked the radiator is also warming up so early when the waterpump hoses are just 50C. When they get to 60C the radiator is full surface warm too. Its cap corner is warming from 30C. I read in the manual the…
- Engine cooling Is it worth to check if the radiator cap is full ? I have driven 250km after they changed the coolant. I checked the reverse tank yesterday and it was toped up to max. and clean inside with that green Honda coolant.
- Engine cooling Hi How does the normal cooling process work with this 1200F model2010? After having RC36 and RC46 for 10+ years my new bike starts the fan much earlier. Actually we have 15C outside and ridding alone on local roads and…
- Vibrations at higher load and RPM, specially with passanger [image: image.png.7ac6494dbb0babb9c5e8c14843b576fc.png]
- Vibrations at higher load and RPM, specially with passanger Thanks for the wishes 🙂 Well, with passenger or sporty style with more open throttle these vibrations already started from 4500RPM(from 106sec on the printscreen). This measurement I did without passenger. Left picture…
- Vibrations at higher load and RPM, specially with passanger Hi Guys, and thanks for your many comments and suggestions. As I wrote, I bought this bike 7 years ago (38k km) in a pretty clean concition, New Spark plugs, filters, oil and tyres also the steering bearings and the…
- Vibrations at higher load and RPM, specially with passanger Please give me you ideas, I am fustrated since I don't know, if it is the normal behaviour of these bikes. I have my loved 2006 model for six years and mainly facing with this issue from the begining. (for now 49k km)…
- Engine Mounts And Vibration Did any of us finally find the root cause and could eliminate the vibration??? Unfortunately my 6.gen's vibration manner did not change so far. However I managed to find and ask the best expert of these v4s in the local…
- Flushing Coolant System No. I did it Cold...as Haynes and an other Honda VFR 800 repair books said. First I simply drained the old coolant opening both drain screws and the radiator cap. Then I plugged in the drain holes and filled up full…
- Flushing Coolant System 2006A model - How much old coolant should I drain (did it when the bike is cold, on main stand, I drained from water pump and also the front cylinder with open cap, and let it drop)? I just did it last week. Then I…
- How Quickly Does Your First One Drop? my 06 bike is pretty linear. 50-55km/bar. If filled on side stand, the first bar can go after 40km.
- How The Abs Should Work On A 06.vfr800A The way I tested mine was to take a spirited ride on a road through a grassy field on the right and treed area on the left. When a deer ran out in front of me I had to do an emergency brake. You can feel the ABS kick in…
- How The Abs Should Work On A 06.vfr800A Hi Could you describe for me how the ABS should work on my 06.VFR800A? How can it be tested if regarding front and rear tires this function is ok together with dual CBS? What should I hear or feel some feedback from the…
- Engine Mounts And Vibration Now I checked it again. My 6th gen. bike makes a high freq. vibration from 4000rpm and higher. The feeling is not good and stronger on higher rpm. Not only the bars but the seat also does it. My passenger complained, he…
- Vtech Buzzing Vibration Could we check it with H-code reader weather all the cylinder can switch to 4 valve mode at 6500rpm?
- Melting-Hot License Plate Frame Hi, please help me how far deep is your license plate frame under the exhaust mufflers? I have full original system, and the airgap is about1-1.5cm. It seems to be too small, since I have melted two frames / 800km under…
- Vtech Behaviour Thanks for the hints. Today, I checked again how it is working. I accelerated below 4000rpm up to 7000rpm in each gears from 2-5. When I let the rev. down and accelerated with 50+% throttle, I could feel some change at…
- Vtech Behaviour Yes, my model is 2006-so updated06+. I made this accelerating test from 4000RPM-in 4.gear at least with 50% throttle. So it was not that smooth-slow change. But the torque drop was complete for a sec. Luckily I was on…
- Vtech Behaviour You mean, I should feel some jump in the torque at 6800? I know it is the transition point for the model till 2005. The newer version should switch at 6500?? but anyway, my bike makes there a full interruption for a…
- Vtech Behaviour Sorry, I am new here and scrolled the topics for a while. I bought a 2006 model and experienced yesterday: -after cruising 4-5000RPM and once rev. it up the power is cut off for a sec. at 6800 RPM - 2. 3. trial, no…
- How Quickly Does Your First One Drop? My 2006 model is pretty linear. Running on flat, one bar is approx 50km. I fill up full, then use it till the last. Only the fist bar can come a bit faster, when the tank is not rally full.
- Engine Mounts And Vibration I have the same issue. From 4000RPM it is comming. Above 7000RPM still active. All of us would be happy solving it. I have recently asked some Honda mechanics: it is V4, it is uneven, or they don't know...I would like…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.