Member record · ID 31112
NathanStubbyStratford
5 posts recovered 0 threads started First seen 17 Aug 2014 Last seen 18 Aug 2014
Recent posts
All 5- 6th Gen - Blue Connector Ground Fix - How To. WELL ive done the blue connector mod and i also cut the yellow melted block off soldered all the wires together and then soldered a ground wire and fixed it to the frame. the bike starts and run. lets see if this fixes…
- 6th Gen - Blue Connector Ground Fix - How To. Adding to my post above. Could i add another earth/ground point to the soldered green wires of the yellow block as well as doing the blue connector earth/ground mod.
- 6th Gen - Blue Connector Ground Fix - How To. i got a replacment harnes. but out out curiosity could the all the green wire in the yellow block be soldered together if the yellow block is an earthing block.
- 6th Gen - Blue Connector Ground Fix - How To. my uk bike does't have this mod. ive got the problem of buzzing sound no lights and the engine has been cutting out. the yellow block is melted and ive oredered a replacement front harness. if i do the blue connector…
- A Question For The Electrical Guru's hello there, could someone shed some light on this for me. two times ive had to bring my bike back on a recovery lorry. the problem is the yellow block with loads of green and silver wires going in it. you see in the…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.