Member record · ID 31142
VFRRR
15 posts recovered 1 thread started First seen 25 Feb 2016 Last seen 7 Jun 2016
Threads started
1 in the archiveRecent posts
All 15- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) HI JZH, it's a 6 mm bolt, because the disc is for the HRC RC45 axle, but eventually, when I receive the right disc, then it will be with 8 mm bolts, and with the same head. I do not think the heads on bolt follow a…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) last things first - I will try the master, because the caliper have small pistons, so I think the pressure it can deliver will be sufficient for that setup to work. the caliper is from ISR, Sweden, made for my setup.…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) I am not sure, an engineer I know, who make steelconstruction will say it will hold the wheel and axle insert in place. It is also pressfitted into the axle. I have also torque the wheel at 280 Nm, as per the HRC manual…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) so the rear axle with the axle insert is ready and tried in the hub. At the same time the light weight rear brake are tried. I am thinking of taking rear master from a Honda CRF250, because there is a integrated…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) Hi, short update: it's been a while since my last post - we have moved houses, and it's first now that I am getting my workshop ready to work in. For now the rear axle is getting welded at a workshop near me and I am…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) thank you very much :biggrin: and yes it hat to come out now :rolleyes: I still need to make up the compartment between the two sides, so the ECU and other electrical stuff can be inside there
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) Some pictures of my new subframe project. Two 10 mm side frame parts water cut in aluminium. Rear end from a Honda RS125... I need to change the wiring loom and routing of it. The plan for are, that the battery will be…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) And now for the brake system, I will have on my bike.. I mentioned in my first post in this thread, that I will have a very light weight rear brake on my bike. I have made the rear brake system for my RC45 years ago.…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) now the price for axle insert + nut including shipping for the US is worked out. it is 145,50 plus paypal fee of 4%. There is 2 left..
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) Hi Rush Can you PM me with your adress and I will get back to you with shipping cost.:-)
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) yes, I will do, but also have the original HRC axle for it:-)
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) Hi Sebspeed you will need to use the sprocket carrier from the nc30/35 reverse or do a cush drive like Mohawk and HighSideNZ have done. Using a sprocket carrier for the Ducati. HighSideNZ have som really nice drawings…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) I don't know if the NC30/35 axle fits the 4th gen hub. I think there was a thread on this question earlier...
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) Hi, I have been looking into making a single nut conversion for the Honda VFR800, because I like the way that it cleans up the rear of the bike and allow me to use other wheels, from a Ducati or other single sided…
- Instead Of Painting The Frame, How About Wrapping It? Hi, I had the same thoughts, but I will until some of the other projects on this bike is done. I am making a single nut conversion and hopefully get the last parts in the next week. I am willing to try this out, also…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.