Member record · ID 31205
JakeWright
20 posts recovered 1 thread started First seen 3 Oct 2014 Last seen 24 Jan 2015
Threads started
1 in the archiveRecent posts
All 20- Mild Head Shake On Deceleration Only To be honest if it was me I'd get both wheels rebalanced and see if the wobble is still there. Do you use puncture safe as this can cause a balanced wheel to be slightly unbalanced if the incorrect amount has been put…
- Mild Head Shake On Deceleration Only Have you checked your tyre pressures? Have you had a new tyre recently? Could be unbalanced. Maybe at worst it is the steering head bearings, more likely tyre pressures, unbalanced wheel
- Post A Picture Of Your Vfr Dutchy There are some nice Indian restaurants in Wales I reckon....... :-) Haha defiantly! There is one about 4 mile up the road!
- Post A Picture Of Your Vfr duccmann JakeWright Here is my vfr, 2003 plate, 14000 miles on the clock, been serviced every 2000 miles and I've had her since June 2014 [image: DSCF3711_zpssmavjj1p.jpg] [image: DSCF3712_zpseerw0e7b.jpg] Is that off…
- Post A Picture Of Your Vfr Here is my vfr, 2003 plate, 14000 miles on the clock, been serviced every 2000 miles and I've had her since June 2014 [image: DSCF3711_zpssmavjj1p.jpg] [image: DSCF3712_zpseerw0e7b.jpg]
- What's Wrong With Redslut? Looks a little like a photo taken using a mirror?
- Advanced Rider Training, Why Don't You Take It? I havent done any advanced riding because I'm not interested in doing it. If I was to go on a track or off road then yes I would do the training. I dont want to do it on the road because I am happy and feel safe with…
- Rear Hub Removal Yep, i also torqued it upto 205nms. I dug out an old flat headed screwdriver and a hammer to stake it..I don't think that nut will be moving for a while
- Rear Hub Removal Woohoo all done :) all bolts tight and all parts back where they belong.
- Rear Hub Removal No, just as cold though. We have a garage on the other side of the road but it has no electric or heating. I have to use an extension to go across the road and then pinch a lamp from the house just for a light! when its…
- Rear Hub Removal Well my new circlip and axle nut has arrived so hopefully I can rebuild the back end when I get home. Knowing my luck it will be too dark to see what I'm doing!
- Rear Hub Removal Ah ok, I'll get some 90 weight gear oil then
- Rear Hub Removal Yeah I need a new chain too, I need to get it rolling so its going to be put back on for now.
- Rear Hub Removal Cleaning time!! Here I set everything out ready to be cleaned and inspected for damage/faulty bearings. [image: DSCF4619_zpsyyp9pduu.jpg] The one thing I found, as was mentioned earlier, the bearings and axle were very…
- Rear Hub Removal As promised, some pictures! I decided it was time to strip down the rear drive and to give it a good clean, the first time I tried to do this it didn't go to plan. I would either lift the back end off the ground or turn…
- Rear Hub Removal I got it off, I asked my neighbour to give it ago while I sat on the bike. A couple of taps with a rubber mallet and the axle came out with ease. Pictures to follow.
- Rear Hub Removal Thank you all, I'll get as many pictures as ! Now its day time I can now see what I'm doing
- Wettest Ride Of My Life The most I became wet on a bike was on my way home from work at night. It had been raining none stop for a week or so. I came over the bridge on my little scooter but didn't see the road was flooded, I hit the flood at…
- Rear Hub Removal Ah I'll get it back together and find someone to sit on it. Thank you for the advice.
- Rear Hub Removal Hello I decided a few months ago it was time to get a proper bike, a 2003 vfr800 VTEC! Now its winter I decided I'll get a few jobs done before winter hits and it gets too cold to play in the garage. The first job I…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.