VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 32484

pzpz

12 posts recovered 2 threads started First seen 22 Aug 2016 Last seen 9 Dec 2016

Threads started

2 in the archive
  1. Front Left brake pads wear 50% faster than right pads, why? pzpz 11 12 Oct 2016 20 Oct 2016 pzpz · 12 Oct 2016 – 20 Oct 2016
  2. whats you"re front disc brake Rotor thickness ? pzpz 3 12 Oct 2016 12 Oct 2016 pzpz · 12 Oct 2016 – 12 Oct 2016

Recent posts

All 12
  1. Rear cam tensioner plunger 9 Dec 2016 19:22 So Let us know how does the story end ? What was the problem ?
  2. Front Left brake pads wear 50% faster than right pads, why? 20 Oct 2016 08:23 Duc2V4, 10/14/2016 at 1:46 AM On the 6 Gen, again using the front brake lever, the right caliper gets all three pistons actuated but only the two outer pistons of the left caliper. The rear pedal triggers the center…
  3. Front Left brake pads wear 50% faster than right pads, why? 13 Oct 2016 22:06 O.K got U now. :beer:
  4. Front Left brake pads wear 50% faster than right pads, why? 13 Oct 2016 08:36 Duc2V4, 10/12/2016 at 4:47 AM The only way the linked braking comes into play on the 5&6 Gens is when the rear brake pedal is pressed. ... From service manual (6 gen) its understood :front and rear brake are…
  5. Front Left brake pads wear 50% faster than right pads, why? 12 Oct 2016 23:03 Its been the same unsymmetrical behavior of pad wear for the last 10 years on 2 different 6'th gen VFR800 (the first was fully serviced at Honda central). Left caliper is clearly hotter than the right side ( Don't try…
  6. Front Left brake pads wear 50% faster than right pads, why? 12 Oct 2016 00:38 Is this because of the vfr's integral brake system (combined front left to rear braking system) ?
  7. whats you"re front disc brake Rotor thickness ? 12 Oct 2016 00:33 Service limit is at 3.5 mm. a mechanic told me i could go as much as 0.2-0.3 mm bellow but not more. Does that sound O.K (vfr800A9) ?
  8. Head Bearing Replacement Answer Needed 26 Sep 2016 19:57 Curious, how does this ends ? What was the problem/mistake (4 the lower race) ?
  9. 6th Gen Coolant Leak 15 Sep 2016 22:00 I replaced the pump with a new one after flushing the old coolant with distilled water. Its good as new now. { difficulties: 1) undoing of the cylinder drain bold took time until i found the right tool to get in there.…
  10. Coolant Coming Out, but Behaving (Mostly) Normally 22 Aug 2016 20:09 Quote Problem solved ?
  11. Help Needed Finding Coolant Leak 22 Aug 2016 19:59 Well, Did U find the source of the leak ?
  12. 6th Gen Coolant Leak 22 Aug 2016 19:50 Have a 6 Gen VFR800, 96.000km, 1st water pump replaced at 66.000 km. now it leaks again (both time from the hole drain under the pump: i.e. internal gasket is fatly). I think the problem is the wrong coolant put in by…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.