Member record · ID 34919
Kochan
12 posts recovered 1 thread started First seen 28 Apr 2019 Last seen 12 Jun 2019
Threads started
1 in the archiveRecent posts
All 12- Engine noise RC46 Hi guys, Just want to update you with the current status. I put everything together replacing: - clutch basket guide - clutch basket bearing - pressure plate bearing - oil pump sprocket chain - friction plates - clutch…
- Engine noise RC46 Thanks a lot for a descriptive answer! Much appreciated! I’m putting everything together now. I have a quick question regarding the pressure plate position. There are marking on the pressure plate but I can’t find…
- Engine noise RC46 I would appreciate your help guys... I’ve replaced the bearing and the tube and the basket is still wobbling. The only thing that comes to my mind is the spacer or the bent main shaft [image: emoji3064.png] ... anyone…
- Front wheel bearings confusion Is there any space between the bearings and the spacer? It would be easier if you would post some pictures on how the bearings look like on both sides of the wheel. Cheers, Kochan Wysłane z iPhone za pomocą Tapatalk
- Engine noise RC46 Anybody here that could look at the videos and say what could be wrong? 🙂 1.mov - https://www.dropbox.com/s/7a9f8q65giu080w/1.mov?dl=0 3.mov - https://www.dropbox.com/s/7a9f8q65giu080w/1.mov?dl=0 12.mov -…
- Engine noise RC46 Thanks for your help buddy! Regarding the outer basket wobble, I hope it’s not the Main Shaft... I think I’ll start with replacing the bearings and the clutch guide. I hope it’ll solve the problem. Maybe somebody else…
- Engine noise RC46 Hi, so... answering your questions 🙂 Is your Oil level correct and of the correct viscosity? - yes Does the bike ride ok when shifting gears? - shifting is bit hard but it works, the clutch seems to Is your warm idle…
- Engine noise RC46 Thanks Grum, I’ll check all things you’ve pointed out as soon as I’ll put my bike together ;) I did not change the oil yet (since last Autumn) since I was not sure if I’ll have o drain the oil to check the clutch or…
- Engine noise RC46 Well, actually it’s still noisy :( This is how it sounds now with the clutch lever being pulled (no noise) and released (knocking). http:// Wysłane z iPhone za pomocą Tapatalk
- Engine noise RC46 Thanks! [image: emoji106.png] [image: emoji1739.png] Wysłane z iPhone za pomocą Tapatalk
- Engine noise RC46 Thanks for the reply. I’ve replaced the CCTs and now it sounds like this: http:// Is this ticking sound normal? Or it’s the timing chain being loose? Or maybe I’m just paranoid? ;) Best, Kochan Wysłane z iPhone za…
- Engine noise RC46 Hi all! I’ve found a few threads with similar title but I get an impression that the noise in my case is bit different. Anyone have an idea what could be the problem? Thanks a lot! Kochan Patient: VFR 800 VTEC ‘09,…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.