Member record · ID 35098
Neo2122
31 posts recovered 3 threads started First seen 28 May 2018 Last seen 17 Sep 2020
Threads started
3 in the archiveRecent posts
All 31- New 5th/6th/8th gen performance header now in production in USA Mohawk So HighsideNZ has a 5th gen engine in 6th gen frame, with a 74mm bigbore & all of my mods for 140hp. I have a lightweight 5th gen circa 205Kg wet, with 120hp. I'd like to do more to it, but time & money always…
- New 5th/6th/8th gen performance header now in production in USA I'm still interested in the tune for the 6th gen. There was some talk about does one of it being available for sale but I haven't heard anything about it since. Is this still a thing or no? Sent from my moto z4 using…
- New 5th/6th/8th gen performance header now in production in USA I just took a box cutter to it and was done in 60 seconds, looks just fine and it's not like anyone will be looking there anyway lol[image: 3a4fee5f6ed52dc1616f7644c7aa5e83.jpg][image:…
- New 5th/6th/8th gen performance header now in production in USA VFR750F3 Just finished bike for road america front right header melted plastic. Incorrectly bent. Disappointed [image: 20190628_133137_Film3.thumb.jpg.49ded63c6afd15b57bd17d4c68b5808f.jpg] Mine also just barely touched…
- New 5th/6th/8th gen performance header now in production in USA Is there anyone with a 6th gen that already got the pipes installed and then got a custom dyno tune? I'm looking to get a PCV but curious if anyone would be willing to share the custom map or "sell" a copy of it lol…
- New 5th/6th/8th gen performance header now in production in USA Mine were like that, it wasn't a problem at all tho just put one pipe in and pulled the other into place Sent from my XT1710-02 using Tapatalk
- New 5th/6th/8th gen performance header now in production in USA keef For even more performance, you could remove the centre stand? Yes, a little jelous i dont have a set. HERESY! lol Sent from my XT1710-02 using Tapatalk
- New 5th/6th/8th gen performance header now in production in USA Here's a simple solution for the center stand stopper guys. All I did is I took one of the old header clamps (2nd pic), flattened it out and removed the threaded end of the clamp. I then dropped out the hole in the one…
- New 5th/6th/8th gen performance header now in production in USA I think I had more space due to the fact that the 6th gen headers had that extra lil bit of length removed from the outlet ping for better fitment if I recall correctly, but what ever the reason, the headers I had for…
- New 5th/6th/8th gen performance header now in production in USA MooseMoose [image: assembly_190426_180720.jpg&key=3603280190a423884b90dd79f68e76fe77813758c20937ee6738b5cc3811ede9] That's a 5th gen. I had to drop the stand. Not every header is 100% the same mine had plenty of space…
- New 5th/6th/8th gen performance header now in production in USA Soooo uh why did we have to remove the center stand..? The pipes go right through it without removing it... Unless I'm missing something here....[image: a90d239bafb043e1c319c837e1602e86.jpg] Sent from my XT1710-02 using…
- New 5th/6th/8th gen performance header now in production in USA With these headers is it possible to install the center stand AFTER the headers are installed? I have the headers but not the center stand stopper piece yet and was wanting to use my time this weekend to install…
- New 5th/6th/8th gen performance header now in production in USA Got my pipes today! Can't thank all of you enough! What a damn good community we got going here, like seriously I don't think anything like this quite exists anywhere else! Sent my extra $32 to ya guys! Happy viffer…
- New 5th/6th/8th gen performance header now in production in USA Mohawk All three 5/6/8 gens top out at 10500rpm, then flatline or decline. We know the restriction is not in the exhaust now, so you might like to try my big air box mod on one of those. When I did mine it added 5hp up…
- Custom Chain Guard Hmmm fair enough, I'll keep an eye on it and see what I think of it over time. It is the Teflon stuff but all good points to consider. I used to have a similar opinion on wax based chain lube, but this stuff is supposed…
- Custom Chain Guard I'm a big fan of mods that look so good that they look almost OEM at first glance but then upon closer inspection you realize it's aftermarket! Sent from my XT1710-02 using Tapatalk
- Custom Chain Guard FJ12Ryder Have to admit that the white looks great, but only while it's clean. [image: emoji846.png] Don't like the stickers at all. Those are usually the first thing to go anything I own. Hate 'em. Be a super clean…
- Custom Chain Guard If give partzilla, bikebandit, and other similar online OEM part dealers a try to find the stickers! Sent from my XT1710-02 using Tapatalk
- Custom Chain Guard MooseMoose That looks great. Which vinyl did you choose? I'd love to try it myself. Might be a fun little mod. And where'd you get the stickers? I don't think the tire info is still available for the 5th gens. I…
- Custom Chain Guard Hello all! Just wanted to share a quick appearance upgrade! My chain guard was becoming quite the eyesore so I decided to do something about it, With some Carbon Fiber 3M Vinyl Wrap and some chemical resistant gloss…
- Denver Riders Tiutis Need a VFR riders get together for a a loop of Deckers and Terryall roads. That’s a 200 mile loop (from Denver) that would satisfy most viffer owners. One of my favorite rides Sent from my XT1710-02 using Tapatalk
- Denver Riders Myself and a number of other Denver vfr riders go out quite often, a couple of us were thinking of maybe going out this Sunday even, if any of y'all are interested Sent from my XT1710-02 using Tapatalk
- VFR800 Gutted Exhaust Mod joemaniaci, 11/11/2018 at 9:15 PM Do the baffles really slide out that easily? I've seen other threads where people said it was a bitch to get the baffles out and they just came out so easily in your video. Yea they do…
- VFR800 Custom/Aftermarket Rear Wheel Modification boOZZIE, 8/14/2018 at 8:38 PM What's the weight of the rim and tire? I measured once before but I forget, I can measure that again here sometime and get back with you on it, but I didn't notice any power difference at…
- VFR800 Custom/Aftermarket Rear Wheel Modification anth85, 8/14/2018 at 1:57 PM it looks good but I'm paranoid about spacers. Especially none hubcentric ones. I am too but after doing A LOT of reading there appears to be a safe zone as long as you don't exceed and inch…
- VFR800 Gutted Exhaust Mod Hahaha yes very much so😉 but actually this exhaust mod is may about 2/3 to 3/4 as loud as removing the exhaust entirely, just to put it in perspective. And I'm thinking about modifying the baffles I removed so I could…
- VFR800 Custom/Aftermarket Rear Wheel Modification Just some more information for ya guys, So the cost of this rear wheel mod was cheaper than buying another stock rear rim, that's why I did it in the first place, but if I remember right it was about: ~$100 for the rim…
- VFR800 Custom/Aftermarket Rear Wheel Modification Here's the links (VFRD and VFRW) to the threads I made about the exhaust mod I did: VFRD: VFRW: http://vfrworld.com/threads/vfr800-gutted-exhaust-mod.55392/ Feel free to ask any questions about it over there!
- VFR800 Custom/Aftermarket Rear Wheel Modification I also made this thread in VFRW so it may be good try and bounce between each forum in case one gets more traffic than the other!…
- VFR800 Custom/Aftermarket Rear Wheel Modification Hello all! So I did this mod a couple years ago and I've absolutely loved it! I originally did it to my first vfr800 which was a silver 2003 non-abs model. I put about 17,000 miles on that bike with about 8,000 - 10,000…
- VFR800 Gutted Exhaust Mod I recently modded my stock vfr800 exhaust! [image: IMG_20180521_123805_986.thumb.jpg.4bfe7b4d05b143fb48f90cb3888b2be2.jpg] Check out this viseo to see how I did it! [video:…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.