Member record · ID 36254
2stroke
13 posts recovered 0 threads started First seen 13 Jun 2016 Last seen 21 Jun 2016
Recent posts
All 13- 4Th Gen Fork Options JZH, 2016-06-15 at 9:44 PM "Stanchions" are the chromed steel tubes. Basically, he's saying to take the CBR600F4i forks apart, and replace the CBR stanchions with your VFR stanchions. Then re-assemble the forks.…
- 4Th Gen Fork Options [image: Motorcycle geometry.jpg]
- 4Th Gen Fork Options 1 hour ago, Trevor Mine is not complete, waiting for F4i axle to arrive, then it goes to my Mechanic to be all fitted up, will take some photos then. Here however is a pic of the KR750 (4th gen) that zRoYz built, using…
- 4Th Gen Fork Options 47 minutes ago, Trevor You do not have to swap fork stanchions to keep the same geometry, the VTEC and VFR750 triples have IDENTICAL offset. All you have to worry about is height. So working on a 20 mm difference in…
- 4Th Gen Fork Options 19 minutes ago, Mohawk Yes CBR forks are a bit shorter than VFR forks, but many people have used them as is with NO adverse effects. The VFR has a very conservative geometry, so will be fine. But if you want the…
- 4Th Gen Fork Options 2 hours ago, Trevor * Upper ond Lower Triples --> ( 2002 -2013 ) VFR800 VTEC (same offset, but 43mm vs 41mm on our bikes) * Forks --> ( 2001-2006 ) CBR600 F4i (43mm less flex and fully adjustable) * Wheel --> (…
- 4Th Gen Fork Options 6 hours ago, Trevor I'm not convinced you need the ( 2002-2013 ) VFR800 VTEC uppers ( wait and see how mine turns out ) ;-) The method I'm using, as in complete F4i forks is both tried and tested, that bike is prob…
- 4Th Gen Fork Options 8 hours ago, JZH 1 . "Stanchions" are the chromed steel tubes. Basically, he's saying to take the CBR600F4i forks apart, and replace the CBR stanchions with your VFR stanchions. Then re-assemble the forks. You will then…
- 4Th Gen Fork Options 21 hours ago, Mohawk Almost all Honda RWU forks are Showa. They use a common thread in the fork top & common clearances throughout. The simplest way to upgrade your forks & not worry about length would be: To use a set…
- 4Th Gen Fork Options Trevor, 2016-06-14 at 10:58 AM * Upper ond Lower Triples --> from 6'th Generation ( 2002 -2013 ) VFR800 VTEC * Forks --> from CBR600 F4i ( 2001-2006 ) * Wheel --> from 5'th Generation ( 1998-2001 ) VFR800Fi * Wheel…
- 4Th Gen Fork Options 10 hours ago, Trevor pretty much nothing if you use vtec triples like i am as they are the same offset What bike in detail ?
- 4Th Gen Fork Options dogman, 2015-12-18 at 1:17 AM Most sportbike triples have less offset than the VFR750 (30mm as opposed to 40mm) which increases the trail and slows down turn in so you need to drop the front and raise the back to…
- 4Th Gen Fork Options I'm in need for a lot of help with a Front upgrade on a VFR750 RC36-II ( 1994 - 1997 ) I have read through this tread and if I have understand things right the easiest way to do an complete Front upgrade is to use the…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.