Member record · ID 38046
crenninger
20 posts recovered 2 threads started First seen 21 May 2017 Last seen 12 Aug 2017
Threads started
2 in the archiveRecent posts
All 20- What is the stock jetting/needle, which needle do I have? made progress today, I am under the impression that the stock plastic washer should be under the needle C clip. I don't have that washer. so I went from 3rd to 5th clip position and it's much better! but not perfect to…
- What is the stock jetting/needle, which needle do I have? 4th groove from the top I assume correct? I'll try this weekend.
- What is the stock jetting/needle, which needle do I have? Hi, yes it's a CA bike. It wasn't a bike from a member. So I took a 55 miles ride today, the bike runs great after 4k RPM, but still hesitate under 4k and/or while on small throttle openings like 1/8 1/4 then the bike…
- What is the stock jetting/needle, which needle do I have? Sorry everyone for the late reply, I finally got around to cleaning the carb for a 2nd time and now it's working as expected! Goes through RPM fine.
- What is the stock jetting/needle, which needle do I have? Anyone on the open port / breather that may need a filter?
- What is the stock jetting/needle, which needle do I have? One question. What are these 2 tubes which are out in the open? Shouldn't they have at least a small breather filter? [image: IMG_4817.JPG] [image: IMG_4818.JPG]
- What is the stock jetting/needle, which needle do I have? Yes, took all the jets out and cleaned. Also spray carb cleaner throughout and waited to see it coming out before putting the jets back it.
- What is the stock jetting/needle, which needle do I have? Alright, carbs are back in. 3rd clip on the needle, 2.5 turn (ca bike) 132 main, 40 idle. The bike started great, idles ok, for now the issue feels like the bike is struggling to get off idle, once past 3/4000 rpm she…
- What is the stock jetting/needle, which needle do I have? Thx, I know Derek. I've done plenty with him regarding the 640 carb and fcr... i had promised myself to buy injection only going forward....
- What is the stock jetting/needle, which needle do I have? pilot screw: 2 turns out Bowl - 10mm should I change any of that?
- What is the stock jetting/needle, which needle do I have? I haven't taken the pilot yet. Will count. Bench sync, I'll check how to do that. I have a carb tune vacuum tool but always used it with the bike running. I bet YouTube can help thank you!!
- What is the stock jetting/needle, which needle do I have? So I am adding the K&N filter to replace the open air box, and you are suggesting i go with 132 main even it should be the dynojet main which I don't have? I don't mind messing around with the needle which are easy to…
- What is the stock jetting/needle, which needle do I have? SO the previous owner was known to muck around and taking the carbs appart as the weather changed.... so.... I got the bike last weekend, I haven't ridden it. It has been sitting in the garage for about 6 years. i am…
- What is the stock jetting/needle, which needle do I have? Hi everyone, I got an estate sale VFR750 '91. So unfortunately I can't know much of history on the bike. I took the carbs out, I got a 40 and 132 jets and the needle pictured below My questions, 1- what is the stock…
- Parting out a 1993 Water pump isn't great... I did took the fork appart, I have Racetech 0.90 Spring and gold valves. Asking $75 + shipping for spring+valves New Spring are $130 valves $150 ...
- Parting out a 1993 12 hours ago, RC51Nick I'd be interested in the water pump assy if you still have it. Price to zip 46725? I haven't pulled that one yet.
- Parting out a 1993 14 hours ago, nitrousva Hello, I'm interested in the tank and whatever white fairing that are good, could you send additional pictures and prices? Thanks Robert tank pictures here and scroll to the right…
- Parting out a 1993 Someone might take a good amount of parts - (all plastics including bulbs/blinkers, rectifier, radiator, mirrors, windscreen, radiator/fan) I should know by tomorrow.
- Just picked up a 93 vfr750f I just listed a 1993 to part-out... see if you need anything
- Parting out a 1993 I ended up picking up a 1993 for part out. I'll keep a few parts for my soon to be 1991 but otherwise everything gotta go. Not looking at being rich here, but cover shipping (from SF Bay Area), make an offer to help out…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.