Member record · ID 38222
ragintxn03
8 posts recovered 3 threads started First seen 31 May 2017 Last seen 8 Oct 2020
Threads started
3 in the archiveRecent posts
All 8- '98 VFR LSL Bar Install & Throttle Tamer 20 hours ago, Dangeruss [...] Try loosening the throttle housing screws and see if that gives more rotation. Once you figure out what part of it is making contact you might be able to file a bit off the cam to get it to…
- '98 VFR LSL Bar Install & Throttle Tamer 18 hours ago, Dangeruss I assume you got the throttle tube from G2 Ego? I am interested in this because I wouldn't mind losing some of the off-idle sensitivity. Since you changed cables and the throttle tube I think you…
- '98 VFR LSL Bar Install & Throttle Tamer Howdy all - quick question for the community. So I installed the Hurricane bar conversion, and got the ST throttle cables for the install. I also decided, while I have it pulled apart, to put a throttle tamer on the…
- Cam Service - was it done? GreginDenver, 6/11/2017 at 9:45 AM I bought a '99 this past December. It was in really good condition but the original owner never did any of the more difficult bits of ongoing maintenance, to include things like…
- Coolant one, the next no more Thanks for all the feedback - give me a place to go. I didn't notice any leaking in the garage, but the comment on baking on the headers makes sense - I'll have to check there. I did get the fairing off and I guess…
- Coolant one, the next no more So as I purchased my '99 VFR about two months ago, and as I do with every bike (mostly) I go through, check all the connections, pressures, fluids, etc. In my due diligence, I replace both my oil and did a coolant…
- Cam Service - was it done? JZH Valve shims, I think you mean? The cams do have to be removed if any shims need replacement, but talking about servicing the cams might cause some furrowed brows... Ciao, Sorry, that is correct - thanks for the…
- Cam Service - was it done? So - I just bought my '99 VFR about two months ago. Struggles with a start (usually two cranks), but I think I figured it out with a battery problem - will know tonight. However, it got me thinking, and the previous…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.