Member record · ID 39749
M0T0RIDER3737
10 posts recovered 1 thread started First seen 30 Jun 2018 Last seen 24 Jul 2020
Threads started
1 in the archiveRecent posts
All 10- Flashing engine light Update for everyone, the MAP sensor has been replaced (along with all the vacuum lines as a precaution) and she is now running as normal, which I'm glad about since if that didn't work the next step according to the…
- Flashing engine light 5 minutes ago, Grum Good job then, if you had of mentioned it then I wouldn't have! :wacko: . Good luck and let's know how you get on with the replacement. Yeah sorry, those tests were what I meant when I said I checked…
- Flashing engine light 4 minutes ago, Grum Sorry if I'm sounding fussy but, are you sure the single vac hose coming in at the underneath of the MAP sensor is properly fitted? Before buying a new MAP sensor I would verify the VCC voltage to it…
- Flashing engine light So update for everyone, after returning to the bike with a more comprehensive assortment of tools, I have removed the airbox, inspected all the vacuum lines underneath, they are all in perfect order, did some testing if…
- Flashing engine light 3 minutes ago, Grum Good luck, keep us posted. Will do, thanks for the assist
- Flashing engine light 10 minutes ago, Grum The other things you can check if you are handy with a Voltmeter. - Disconnect the MAP sensor plug and with your voltmeter between the Yellow/Red and the Gray wires at the plug you should see 4.75v…
- Flashing engine light 1 hour ago, Grum O.K. So you have located the MAP sensor and confirmed its plugged in properly, Yes? You may need to remove the airbox and confirm the Vaccum hoses to the 5way junction and the one to the MAP sensor are…
- Flashing engine light The battery it brand new, or near enough, the only thing under the tank that was done was plugs and air filter at least 6 months ago, was running fine yesterday, no issues till today, though following what you said,…
- Flashing engine light Hey all just wanted to find out if anyone has had a similar issue, when to start the bike, it was a bit slow to crank and very low rpm at idle, about 900 or so, the engine light is flashing twice with a long pause…
- What did you do to your VFR Today? Did some more work on a custom GPS mount for the bike, no photos yet, I'm waiting to have it finished, painted and mounted first.
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.