Member record · ID 39975
nikovee
13 posts recovered 2 threads started First seen 11 Jun 2021 Last seen 30 Sep 2021
Threads started
2 in the archiveRecent posts
All 13- Help! Looking for 90501-MN8-000 Conical Spring Washer 20 hours ago, Captain 80s The washer for a 98 is still available and is listed as 35mm ID WASHER, CONICAL SPRING (35) 90501-MBG-003 Reached out to a Honda parts dealer asking if the above PN was a direct replacement,…
- Help! Looking for 90501-MN8-000 Conical Spring Washer cap'n coming though again! thanks man! will give it a shot, hoping it's a direct replacement
- Help! Looking for 90501-MN8-000 Conical Spring Washer It's a long shot but looking for the conical spring washer that sits between the rear wheel hub and axle nut. mine decided it was time to move and eloped along with the axle nut on my last ride (full story here ). I am…
- Rear hub flew off of my '92 I suspect its the original chain. anyone know of any way to confirm that? did the oems have any part marking stamped into em? DSS just got back to me telling they can't get the spring washer, seems like I'll have more…
- Rear hub flew off of my '92 3 hours ago, DannoXYZ I went to UC Santa Cruz for bit and that salt air simply corrodes anything quickly. My chain would rust overnight after thorough cleaning and oiling! Yeah, that's one downside of living in a beach…
- Rear hub flew off of my '92 thanks for the tip JZH! placed an order through DSS, hopefully it won't take too long. I was able to successfully remove the insert, finally got that rear up on the stand. looking at the front sprocket, I didn't notice…
- Rear hub flew off of my '92 Looks like 195 Nm per the service manual. I know the nut was staked as I recall seeing the deformation, but guessing it wasn't staked well enough. fortunately I work in aviation and have access to plenty of safety wire,…
- Rear hub flew off of my '92 all valid questions. my suspicion is the insert is for a wheel stand rather than any kind of structural support. the insert is about 3-4" in length, so it does not protrude through the center of the axle. going to try…
- Rear hub flew off of my '92 DannoXYZ, 9/21/2021 at 12:36 PM Could be factory axle with some sort of sleeve stuffed in. Perhaps to fit stand of some sort? Took a closer look last night and it looks like it might actually be a plug/sleeve. Any…
- Rear hub flew off of my '92 JZH, 9/18/2021 at 1:23 AM That is not the OEM '90-'93 axle (or it has something stuck into it for some reason). Worth investigating. Thanks for confirming my suspicions! Any idea of what this axle may have come off of?
- Rear hub flew off of my '92 thanks for the love yall! the nut was indeed staked, but maybe not properly. I haven't serviced the rear end at all in the 2 years I've owned this bike, so it's possible the PO took it to a less than reputable shop (or…
- Rear hub flew off of my '92 As the title suggests, the rear hub departed the rear axle as I was riding yesterday. Luckily, I was getting off the freeway at low speed when it happened, otherwise could have been much worse. I have no idea how, but…
- A treasure trove of unobtanium bits for a 3rd gen sorry to hear about your accident! are you parting out or looking to sell as a whole?
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.