Member record · ID 42022
Peka
21 posts recovered 3 threads started First seen 26 Jun 2020 Last seen 6 Jan 2021
Threads started
3 in the archiveRecent posts
All 21- Measuring pickup resistance? Hello guys! Just to let you know that I fixed the problem! ICM and one sparkplug cap is replaced, and now bike is like new again! Thanks for the help!
- Measuring pickup resistance? Grum, 12/2/2020 at 10:25 AM Are you measuring this with 4p plug still connected to the Pulse Gen Coils? This would explain your reading of 290 ohms. From what I read, the coils need to be unplugged for this test, you…
- Measuring pickup resistance? DannoXYZ, 11/28/2020 at 2:49 AM Measure its opening vacuum and flow-volume? Thank you for this suggestion, can I ask how to do this?
- Measuring pickup resistance? Grum, 11/27/2020 at 10:31 PM Should be Blue to White/Blue. 200 to 400 ohms. And the other is the Yellow to White/Yellow. Again 200 to 400 ohms. I measured according to this, and it is fine. But when I measure on back…
- Measuring pickup resistance? Hi Grum! Thank you for this note! I will measure tomorrow, to see will it be any difference.
- Measuring pickup resistance? Hello fellow riders, I've been trying to months to resolve issue with no power in high rpm on my RC36 VFR 750 1990. Issue is not related to carbs and whole air/fuel system, since all that was serviced. It seems that is…
- VFR 750 knocking sound when clutch is released Thanks! 👍 that is exactly what is happening! ok, so nothing to worry about!
- VFR 750 knocking sound when clutch is released Hello guys! I noticed strange knocking sound when clutch is not under pressure. It is coming from left side of the engine, when sitting on bike. I recorded video, hopefully you can hear knocking. Does anyone suggest…
- 750 rc36 don’t go over 9k rpm Ok! It works so much better. Actually, is working by far better then when I purchase it. It runs all the way up to 11500 rpm. But on the end it struggles a little bit. tomorrow new spark plug and air filter are…
- 750 rc36 don’t go over 9k rpm When I blow air into black hose, only one slide rise up. I will open carbs again to check it
- 750 rc36 don’t go over 9k rpm 14 hours ago, squirrelbrains so u first say ok and later no ok ? u might have screwedup cap after inspection. test by blowing air into the large black hose on carbs and all slides should rise up. Sorry for wrong…
- 750 rc36 don’t go over 9k rpm 9 minutes ago, Thumbs I can see the slide stopping in the first video, what’s the second one showing? I washed the slides with Simple Green then rubbed the outside with a pencil to leave graphite as a lubricant I was…
- 750 rc36 don’t go over 9k rpm and this IMG_2931.MOV
- 750 rc36 don’t go over 9k rpm I wanted to check if diaphrags are opening all the way and this is what I notices. One of them sometime it doesn’t close FullSizeRender.mov
- 750 rc36 don’t go over 9k rpm 47 minutes ago, Dutchy www.Louis.eu ships to Serbia (DHL); best order everyting in one go as shipping costs are eur 20 [image: image.thumb.png.e1b33918ce639cf07c6f6ef61c343ac5.png] I will order it, just this is not…
- 750 rc36 don’t go over 9k rpm 9 hours ago, squirrelbrains make sure u run a wire clear through the side holes on the emulsion tubes (main jet holders). if they're partli blocked it will cause a rich mixture. btw: a compression test is a good idea…
- 750 rc36 don’t go over 9k rpm I done a little research. I should have to check floats, and float valve. Maybe they are worn out, thus it’s running rich. I’ll see that, maybe tomorrow. To bad that this is happening now, when it is driving season. You…
- 750 rc36 don’t go over 9k rpm 4 hours ago, Thumbs It’s running rich .....so did you check the float height and/or replace the float valve needles? Are the jets clear? The radiator should swing out the way to allow access to the front plugs Jets are…
- 750 rc36 don’t go over 9k rpm Thanks Dutchy. Today I’ve cleaned carbs and check membranes, they are fine, and carbs are nice and clean. but now it goes worse than before??? Previously, on neutral I could rev u to 11,500 rpm, now it is stucked to 9…
- 750 rc36 don’t go over 9k rpm thanks, I will check it
- 750 rc36 don’t go over 9k rpm Hello all, recently bought VFR750FL 1989. Great bike! except... doesn’t run above 9k rpm. Do you have suggestion what could it be? Carbs possibly? Today I check fuel hose, had a hole in it, so I fixes it. Also, I check…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.