Member record · ID 44864
Jroberts3
9 posts recovered 1 thread started First seen 2 Oct 2021 Last seen 15 Oct 2021
Threads started
1 in the archiveRecent posts
All 9- Barn Find - need help please Hello everyone. Per Grum's and Danno's suggestions, I confirmed all injector and coil wires are the correct color and I measured all sensors for voltage and resistance. I also pulled the throttle bodies and replaced all…
- Barn Find - need help please Greeting everyone, hope your weekends were great! The noid light arrived and I was able to do some testing. First though I would like to clarify some things brought up in the posts. The ECU: By pure luck the E-bay…
- Barn Find - need help please Thank you DannoXYZ and Grum, that was very helpful. I installed the new ECU and the fuel pump primes good again. Still no start, not even a little fire like before. Will double check spark later. No codes or smell of…
- Barn Find - need help please Thank you Grum, DannoXYZ and Ducnut, I really appreciate your suggestions and patience as I try to make sense of everything. This is what I did this evening: 1) Installed all components 2) Tested all fuses for…
- Barn Find - need help please 15 hours ago, Grum You should be seeing 12v on both the Black/White wires of the Fuel Cut Relay base, with Ignition to On, Kill Switch to RUN. By confirming 12v at this point also confirms both Engine Stop Relay and…
- Barn Find - need help please Thank you DannoXYZ and Grum, I deserve every bit of public humiliation I receive. Sadly, I knew better and did it anyway. I am humbled but not deterred and really appreciate your time and effort helping me. The…
- Barn Find - need help please Thanks again everyone, I was able to confirm the fuel pressure regulator operates without leakage into the vacuum tube, but in the process took 2 steps back. I did a stupid thing and jumped the fuel cutoff relay trying…
- Barn Find - need help please Thanks for all the suggestions everyone, I will check the fuel reg after work this evening and report back. Fingers crossed.
- Barn Find - need help please Greetings everyone, I am new to the VFR forums and have found this site to be a tremendous resource. I hope you guys can help me troubleshoot my issue. I wasn’t looking for a project when I came across this non-running…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.