VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 5567

goldVFR

10 posts recovered 1 thread started First seen 28 Feb 2006 Last seen 6 Jun 2007

Threads started

1 in the archive
  1. Single sided swingarms goldVFR 133 28 Feb 2006 5 May 2009 goldVFR · 28 Feb 2006 – 5 May 2009

Recent posts

All 10
  1. Bridgestone Bt-021 Review 6 Jun 2007 03:12 I just switched from Dunlop Qulifiers to BT-20s. The Qualifiers were toast. I kept them on there much longer than I should have. About 5000 miles. But I never really had any trouble with them as far as riding the…
  2. voltmeter readings 5th gen 11 Apr 2006 02:40 I think there might be some confusion here, some info just in case there is: A multi-meter can measure voltage, resistance and current. When measuring voltage the meter goes in parallel with what you are measuring ,…
  3. voltmeter readings 5th gen 10 Apr 2006 20:43 Re:? "Neg should work too."? I saw that in a manual (maybe the factory one) and got "000" for a milliamp reading, which sounds good (no drain), but shouldn't a bike with a clock always show at least a small drain?? I'll…
  4. voltmeter readings 5th gen 10 Apr 2006 01:36 Anyone have thoughts on why my voltage reads higher at idle than at 4k?? Is the alt/stator only putting out 12.6v or so, and the battery was holding 13.6?? Reading the alt/stator voltage at 4k, and reading just the…
  5. voltmeter readings 5th gen 9 Apr 2006 01:58 OK here are some readings after the battery got charged up. IDLE - low beams 13.5 - 13.7 2K RPM's? 14.1-14.3 5K RPM's? 14.3 IDLE - High beams? 13.3 - 13.4 After shutting off and sitting about a minute, 12.8 Do all of…
  6. Single sided swingarms 4 Mar 2006 16:01 Beck, on Mar 2 2006, 07:56 PM, said: Putting on lots of preload to keep the rear up can overstiffen the rear suspension action which lessens compliance which can then affect traction. That's why I think raising the ride…
  7. Single sided swingarms 4 Mar 2006 15:48 vfrmonkey, on Mar 3 2006, 12:03 PM, said: Why are we in the body and paint forum? <{POST_SNAPBACK}> My bad. Initially I was thinking about the single sided swingarm in terms of its beauty not function. Thats why we are…
  8. Single sided swingarms 3 Mar 2006 00:41 2003_VTEC_Rider, on Mar 2 2006, 01:23 PM, said: Now, I might have been going about this the wrong way, so any thoughts on it are appreciated, <{POST_SNAPBACK}> When you dial-in more preload, the bike's (sagging)…
  9. Single sided swingarms 2 Mar 2006 15:13 After starting this thread I got too busy with work. Wow there has been like hundred posts on it. 1) "Who cares about old race bikes." ??? A lot of us do!! One of the cool things about the VFR is its racing roots. 2) I…
  10. Single sided swingarms 28 Feb 2006 02:54 I think the single sided swing arm is one of the coolest motorcyle innovations. Does anyone know its history, where it came from etc? Also is there any performance related advantages, or is it just made to look cool?…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.