VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 7476

syjang40

9 posts recovered 2 threads started First seen 3 May 2009 Last seen 30 Jun 2009

Threads started

2 in the archive
  1. Fork Tube Allen Bolt Removal - Help! syjang40 17 7 Jun 2009 19 Jun 2009 syjang40 · 7 Jun 2009 – 19 Jun 2009
  2. Bar Ends syjang40 23 9 May 2009 13 Apr 2015 syjang40 · 9 May 2009 – 13 Apr 2015

Recent posts

All 9
  1. Pothole Shut Off My Lowbeams 30 Jun 2009 22:11 [image: View Post]MotoDG, on Jun 30 2009, 03:10 PM, said: Well, to update my post, I went out today and tried a new bulb...no dice. Then I checked the fuses and again, nadda. I'm a good deal stumped and electrical is…
  2. Fork Tube Allen Bolt Removal - Help! 19 Jun 2009 01:22 Another option for easier future removal of allen bolt is this modification. Go back to this old thread and scroll down to my cartridge pictures. A picture is worth a thousand. http://www.vfrdiscus...p...c=36818&hl=…
  3. Fork Tube Allen Bolt Removal - Help! 9 Jun 2009 00:08 The only time I ever drill out the bolt is when the hex strips.... which happens sometimes. ...because those bolts are special "shallow-head" cap screws, which means there is less for the Allen wrench to grip, so…
  4. Fork Tube Allen Bolt Removal - Help! 8 Jun 2009 01:12 The darn thing just spins!. What are my options here? Second time I rebuilt the forks, I broke them loose with the springs in, no problem. The first time, I removed the springs first, and had your same trouble. This was…
  5. Fork Tube Allen Bolt Removal - Help! 7 Jun 2009 18:24 Hi folks. I need some help here. After doing a 929 shock install on my 5th gen, I decided to go with Race Tech 0.9 kg/mm springs and compression Gold Valves for the forks. All went well until I tried to remove the fork…
  6. Bar Ends 9 May 2009 06:48 Correct me if I'm wrong...but isn't the function of bar ends is to reduce vibration...right?. So if I were to replace them with lighter and prettier ones from ebay (anodized aluminum with carbon effect), would they…
  7. 929/954 Shock Install (5th Gen) 4 May 2009 02:20 Thanks for the compliments guys!!. Rangemaster, the stock bracket I had in the AutoCAD drawing was from my measurements from the OEM part. I used that as a base drawing to build my other drawing. If I were to make that…
  8. 929/954 Shock Install (5th Gen) 3 May 2009 18:31 Thanks for the compliments guys!!. Rangemaster, the stock bracket I had in the AutoCAD drawing was from my measurements from the OEM part. I used that as a base drawing to build my other drawing. If I were to make that…
  9. 929/954 Shock Install (5th Gen) 3 May 2009 13:50 Hi Folks!!..first off, I would like to thank the many knowledgeable people in this forum to help me make the swap to a 929 shock possible. I just want to share my experiences of the install on my 5th gen. and hopefully…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.