Member record · ID 13861
jsalty
15 posts recovered 3 threads started First seen 4 May 2008 Last seen 28 Jan 2011
Threads started
3 in the archiveRecent posts
All 15- heated gear It's all personal preference.. lol I have mine tucked up the center of the seat between my legs. No issues so far. Mine exits in front of seat between the tank and seat. Connected directly to the battery with a inline…
- Fork rebuild Questions Basically I am looking for a hit list on things I need to rebuild my front suspension. I am 6'3" 215lbs riding on an 04' VFR with 21,000 miles as of today, The front end has never been touched. It handles worse than my…
- PC III EC vs. PC III USb [image: View Post]gpd211, on 29 April 2010 - 06:38 AM, said: [image: View Post]jsalty, on 29 April 2010 - 02:57 AM, said: anyone know why someone would buy the PC III ex vs. the PC III USb?. they seem to use the same…
- PC III EC vs. PC III USb anyone know why someone would buy the PC III ex vs. the PC III USb?. they seem to use the same maps, just wondering what the major differences are. starting to get fedup with the jerky throttle responses and low rpm…
- Cant Get My Gas Cap Open My lock has been acting up when trying to close the last few days. I was wondering about a new cap that does not lock. is there such an animal out on the market or anyone know someone who makes one. I am not concerned…
- Question For Those With Oem Side Bags + Aftermarket Slip-on I had Microns and they would not fit once i got my OEM bags, I switched to REMUS and all is well... still have the Microns if anyone is interested....
- Tire Issue [image: View Post]gr8vfr, on Dec 24 2008, 01:44 PM, said: If you're getting 10K out of tires... I am guessing that you never heard of Gobbler, Istachatta an Ozello. I mostly use the VFR as my commuter, however I do find…
- Tire Issue [image: View Post]jeremy556, on Dec 24 2008, 11:53 AM, said: Certainly can't hurt to replace the steering bearings. I have been using the AllBallz tapered roller steering bearings (and their wheel bearings) for the last…
- Tire Issue I have ordered wheel bearings and will replace them on a precautionary basis when I replace the tire next week. I have also ordered new tapered steering head bearings along with new seals and dust covers for the forks.…
- Tire Issue Mostly state highway and us highway travel, i can see the crown giving me problems, plus i like those left hand curves too. if i do the oil i will do the head bearings too, Now can I get the tapered head bearings form…
- Tire Issue the tire is wavy on the clutch side only. The rear is needing changed at this mark too (10k miles) and this was not surprise, i just figured i would get twice the mileage out of the front than the rear like i have on…
- Tire Issue [image: View Post]Baileyrock, on Dec 23 2008, 04:55 PM, said: Hi Jim, Sounds like just a bad/cupped tire to me, I would check the steering stem bearings for play but otherwise just time for a new tire IMO. Several…
- Tire Issue Hello, I have about 10,000 miles on this FRONT tire, tread still has good depth (AVON Storm). When I apply the front break I get a small vibration most of the time, i have (not lately) checked the front bearings and…
- Vtec Microns And Hardbags (saddlebag) Fit Question as was already said, the Micron's are too large in diameter and are spread too far apart. the modification to the hardware (brackets) would work. It would have to be done on the bike as any good custom job. I tried to…
- Vtec Microns And Hardbags (saddlebag) Fit Question I have Microns and purchased OEM hard bags thinking things would fit and i was WRONG!!!!!!!!!!. I am currently looking for other exhaust options so i can get my bags installed by late May for my trip. if i would have…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.