Member record · ID 22236
Moosilla
11 posts recovered 2 threads started First seen 13 Oct 2012 Last seen 13 Apr 2013
Threads started
2 in the archiveRecent posts
All 11- Winter Project #1 .... Custom Givi Wing Rack Mounts Looks sick, I'm getting ready to do the exact same thing on my 94. I scored a givi setup off ebay but it has Triumph mounts. You dont, by change have the measurements of the flat stock cuts you made do you? No…
- Winter Project #1 .... Custom Givi Wing Rack Mounts Nice alright how do you get the bike on the work bench. I have a couple of ramps that I use for the trailer ... I just roll it up and down. One of these days I am going to break down and buy a hoist/lift
- Winter Project #1 .... Custom Givi Wing Rack Mounts Finished up the project: -Painted the Brackets and did the final install with Socket Head Bolts and Nyloc Nuts -Installed some ADMORE LED tail/brake lights behind the stock lens on the Givi E41's [image:…
- Winter Project #2 - Suspension Upgrades Parts and tools are in ... Fork Reassembly time. [image: 857232_10151441602989127_1250883609_o.jp] New Slider/Bushings, and oils seal [image: 860031_10151441605549127_1455349942_o.jp] Driving the oil seal in [image:…
- Winter Project #2 - Suspension Upgrades how much longer is that rear shock ?? i remember reading some where that people used a shim in the top mount of the cbr shock to give a little more height or to level it out im not sure , only ask as im about to swap…
- Winter Project #2 - Suspension Upgrades I am planning some longer trips this year and I wanted to get the 90 VFR more comfortable (plus it was time for fork maintenance anyways) So I figured it was time to update and rebuild the suspension. I ordered a…
- Winter Project #1 .... Custom Givi Wing Rack Mounts Decided to add a vertical support that tied into the passenger grab handles I Measured and bent up some brackets that tied into a upper mount on the Givi Wingrack, then I Drilled and bolted it to the grab handles…
- Winter Project #1 .... Custom Givi Wing Rack Mounts More Stuff Done: Tack welded the brackets in place [image: Posted Image] Took them over to the bench and Tig'ed them up (Bit rusty it has been a year or so) [image: Posted Image] [image: Posted Image] Installed them on…
- Winter Project #1 .... Custom Givi Wing Rack Mounts Well as the weather lately has been crappy (wet) and cold (regularily dipping below freezing) I have thrown in the towel and brought the bike in for the winter and start on the Givi Project. I appoligise for the picture…
- Winter Project #1 .... Custom Givi Wing Rack Mounts I will be interested in this because I am doing the same thing on my Seca2. I'll tell you this from my first try: it isn't easy and if it moves a fraction of a mm on the bench, it will flop all over the place on the…
- Winter Project #1 .... Custom Givi Wing Rack Mounts I am JUST starting to plan for the Winter Upgrades / Maintenence on the 90 VFR. I have been ordering parts to get me stocked up for the winter In about 2-3 Weeks (End of October) the bike will be put away for the winter…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.