Member record · ID 23214
Civilizeddog
18 posts recovered 5 threads started First seen 1 Mar 2012 Last seen 22 Jun 2012
Threads started
5 in the archive- Clutch slipping Civilizeddog · 20 Jun 2012 – 23 Jun 2012
- Shake, rattle, & roll. Fork spring swap? Civilizeddog · 1 Jun 2012 – 2 Jun 2012
- '93 muffler fell off, can I leave it off? Civilizeddog · 29 May 2012 – 30 May 2012
- Need fuel level sensor plug pics please!!! Civilizeddog · 15 Mar 2012 – 15 Mar 2012
- Stubborn carbs - wont go back in! Civilizeddog · 1 Mar 2012 – 24 Oct 2012
Recent posts
All 18- Clutch slipping I always change my oil twice as early as I should, usually at 1500 miles. But I'm definitely changing after 50-100 for this go around because of the fuel wash. Still stumped on the clutch issue, I guess I'll just have…
- Clutch slipping I had a stuck float in one of the carbs so I removed the carbs and took everything apart, cleaned, and reassembled. That solved the fuel leak issue. Just changed my oil a moment ago and must say there was a significant…
- Clutch slipping I recently noticed a slight to moderate odor of fuel in my 93's oil. At the same time my clutch has started to slip in 6th at about 1100 rpm. I am most certainly changing my oil today but wanted to get the opinion of…
- Shake, rattle, & roll. Fork spring swap? Reading up on what JD has to say about the issue in general is inspiring and at the same time daunting. I wish I was better educated in the engineering behind all of the factors involved, appears to be somewhat…
- Shake, rattle, & roll. Fork spring swap? My '93 750 is starting to show signs of fork spring/old oil stress. The handlebars shake and rattle over just about every bump and the front end dives more than it should when coming to a slightly aggressive stop. I…
- '93 muffler fell off, can I leave it off? One of the mods I did this winter was yank the 93 subframe and swap it with an 08 cbr600 subframe and tail. I integrated the tail lights with the viffer's wiring harness. I have my friends 08 cbr600 stock exhaust which…
- '93 muffler fell off, can I leave it off? Found this on eBay, tell me what you think?…
- '93 muffler fell off, can I leave it off? Definitely worth checking the plugs, I agree. I found a really interesting article online while researching my predicament. I want to provide the link just because it may be usefull/ helpfull for anyone else in my shoes…
- '93 muffler fell off, can I leave it off? Timmy are you really a cop? I don't think I'm breaking any noise ordinances but I still don't want a ticket. The collector box has a baffle-like structure built into it, not sure what it's for but it seems to also aid…
- '93 muffler fell off, can I leave it off? Monk, I was going to take the junkyard route like you mentioned but I'd rather just leave muffler off all together if possible.
- '93 muffler fell off, can I leave it off? The muffler broke off right where the flange bolts to the collector box. I read about the cold air getting sucked in and warping the valves also buy most of those complaints came from people who had bad header gaskets…
- '93 muffler fell off, can I leave it off? The muffler on my 93 came off (read: rotted and fell off) a few days ago. The sound really isn't that loud, compared to a Harley it is more like a loud whisper. My question is, can I just leave it off and ride without…
- Need fuel level sensor plug pics please!!! I found it. It was jammed down the side of the frame between the rear cylinder head, #3, sandwiched between two thick bundles of wiring harness, phew... should be riding by Saturday.
- Need fuel level sensor plug pics please!!! I'll look when I get home but I can't say I'm too inspired really, I swear I've checked every inch of the bike with a fine tooth comb and still can't find it which is why I was hoping for a pic. It's a '93, three prong…
- Need fuel level sensor plug pics please!!! This is real dumb but here we go. I absolutely CANNOT find the socket that the fuel level sensor from the tank plugs into. I know how lame this sounds but I am tearing my hair out over this. I unsecured the wiring…
- Stubborn carbs - wont go back in! Holy crap, I heated up the new boots and swabbed the inside with dish soap and then pushed down on the front and rear and felt a very positive pop from the rear left carb (cylinder 1) and looked, it's defiantly in. But…
- Stubborn carbs - wont go back in! Yeah I remembered hearing about a method involving ratchet straps but didn't know the whole process. I'm gonna try the dish soap/ oil trick along with the heat gun, thinking I might get lucky with that. @Eamann, looking…
- Stubborn carbs - wont go back in! Small problem big headache, trying to pop my 93 carbs back into brand new insulators. I knocked the insulators onto both cylinder heads first, they are rather soft compared to the hard, 18 year old boots they replaced.…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.