Member record · ID 24623
scottlarson737
4 posts recovered 1 thread started First seen 3 Apr 2012 Last seen 2 Apr 2013
Threads started
1 in the archiveRecent posts
All 4- Changing Sprockets And Chain Leads To Bleeding Clutch Veefer, are you saying to suck out one reservoir worth of hydraulic fluid by utilizing the nipple on the slave? Not sure what you are recommending (could also squeeze the clutch lever, unscrew the connection at the…
- Changing Sprockets And Chain Leads To Bleeding Clutch Ok, so first let me admit that I've never changed sprockets or bled a clutch line. I took a risk and purchased a rivet-style chain (D.I.D.) as well as the chain riveting tool. I performed the deed in the dark of night,…
- Automotive equivilants for head light bulbs? Just bought some H4's off of Amazon for $2.86 each http://www.1000bulbs...e(float)]=0..56 . I installed them, and they seem to work just fine. Clip off the (2) lower tabs and shove them in. Hard to beat the price.
- low RPM bogging/surging - resolved I have a 2001 VFR that kept stalling out at stop signs and during low rpm's. At the time, I was adamant that I would not run ethanol through the bike . . . could only find non-ethanol in the 91 octane fuel. I was…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.