Member record · ID 25774
gj6n68
10 posts recovered 0 threads started First seen 23 Jun 2014 Last seen 30 Apr 2015
Recent posts
All 10- Replace Stator And Flywheel - How To With Pics You shouldn't have continuity between the three legs & ground so that is correct That is correct, meaning stator is faulty ? It show very tiny readings in ohms, 0.06, 0.06 and 0.04. Sorry to ask further questions, but I…
- Replace Stator And Flywheel - How To With Pics Hello everyone, haven't been posting much as my motorcycle has been off road last year or so, mainly because of stator. I've just managed to put in a new stator from Ricks and out of curiosity did the test between three…
- Should Stator Wires Be Almost "too Hot To Touch"? Hi All, Hope everyone had a good summer and safe riding. I've just been searching for jobs and now finally in position to order this part to be able to get the bike running for next summers. I have a 1998 VFR800Fi. 1.…
- Should Stator Wires Be Almost "too Hot To Touch"? spud786 Yeah just go straight to the ground test, the rest are meaningless if you cant pass that one. Hi, I am thinking of ordering a new Stator but was wondering if the wires would get hot because of the connectors…
- Should Stator Wires Be Almost "too Hot To Touch"? spud786 gj6n68 ember1205 Connectivity to ground is BAD. Your 1ohm readings should be open load. Thanks a lot, I completely agree, but does that one test out of all the tests for stator confirm that I need a new stator…
- Should Stator Wires Be Almost "too Hot To Touch"? ember1205 My understanding is that all tests must PASS in order to be considered good. Anything else and it's a FAIL. You're doing the ground test with the harness disconnected, right? Yes, indeed doing it with engine…
- Should Stator Wires Be Almost "too Hot To Touch"? ember1205 Connectivity to ground is BAD. Your 1ohm readings should be open load. Thanks a lot, I completely agree, but does that one test out of all the tests for stator confirm that I need a new stator ??? Or is there…
- Should Stator Wires Be Almost "too Hot To Touch"? spud786 1 ohm through the connector on any wire is high, you should be able to get it down to like( .2 ohms max or zero is best). engine should be off while doing any ohms check. I get 1 ohm when I run the test between…
- Should Stator Wires Be Almost "too Hot To Touch"? ember1205 Make sure you're testing properly... Testing for continuity to ground is typically done with the motor off, as in this video. [video: https://www.youtube.com/embed/5v2LtHlvcqI?feature=oembed] Hi, Thanks for…
- Should Stator Wires Be Almost "too Hot To Touch"? Hello All, Thanks for everyone's efforts in helping me out and sorry for not providing complete information. Please find my replies below: CandyRedRC46 If you get an FH020aa it WILL stay cool. Sent from my iPhone using…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.