Member record · ID 35642
wiremanjon
16 posts recovered 3 threads started First seen 22 Feb 2017 Last seen 21 Mar 2025
Threads started
3 in the archiveRecent posts
All 16- Heli Bars Vs Handlebar Conversion Vs ? Convertibars.com
- Trex Frame Sliders Install Issue Be very careful to reinstall the spacer behind the bottom bolt every time you reinstall the slider. Don’t ask me how I know! 😳
- Differences in front cowl and front cowl stay between 02 and 06 model I don’t know if it’ll be a direct replacement fit. I’m going to guess not, but with enough determination you’ll figure out how to overcome the hurdles and make it work with a little modification and ingenuity. Go for it.
- Brake replacements I went with the Ebc hh’s. They’re similar to the stock pads. The stock pads are very good in my opinion. I think I actually like the feel of less bite better, easier to control the nuanced way I use the brakes lightly.
- New member, thinking of a VFR 2006’s and up are less problematic. 2014’s (8th)are even better than the 6th generation. I’m led to believe. It’s basically the same motor. For the 6th generation VFR all you have to do is replace the rectifier with a…
- LED headlight bulb replacement I tried these, they work quite well. I did however decide not to use the rubber boots with them. They’re aimed well and very much brighter than the halogens. BEAMTECH H4 LED Headlight Bulb, 50W 6500K 8000Lumens…
- Vtec Shock Options rhoderage, 6/18/2020 at 3:29 AM Yep that was my solution and still holding strong years later. THe only reason i had to chop into the battery tray was that with a passenger on the bike, i found the reservoir [mounted in…
- Vtec Shock Options ihilker, 7/18/2020 at 8:35 PM I just put a Penske on my 03 last November with RaceTech 1.1 kg springs up front. I have pictures step by step somewhere... I should post them up. You should.
- Vtec Shock Options Hello, I bought Jamie’s fork cartridge kit and BD-40 shock for my 2006 Abs. I just installed the shock. Scratching my head over how to mount the remote canister. Anyone have any good ideas and pictures? I found one…
- Owners Manuals and other YSS Fork Spring TableNew Maintenece File In vfrd downloads gmtech94, 12/16/2019 at 9:05 AM I have springs and a shock for you . Whatcha got?
- New donation from wiremanjon Hi wiremanjon, Thank you for your donation of 10.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion
- Vtec Shock Options Let’s get this old thread restarted! So Jaime has a new shock he’s touting as his flagship line of shocks. The BD40 line of shocks. Has anyone tried the new shock yet? I’m also confused as to which fork upgrade the Vtec…
- Post your Voltmeter mount pics A little Z bracket with two holes drilled for the tank bolts to pass through. Connected it to the switched ignition wire group. soldered and taped and forgotten. Monitoring is smart!
- Convertibars Installation Does anyone have pictures of their installation on an ABS model install?
- New donation from wiremanjon Hi wiremanjon, Thank you for your donation of --. We look forward to improving the forums with your donation. Thanks VFRDiscussion
- Puig low cut screen - I want one Is this it? [image: IMG_2934.JPG]
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.